Hi Guys, I need some advice
Problem 1:
I recently purchased a glowshift boost gauge and a voltage gauge to install into the cubbyhole of my 2007 Subaru Liberty GT Spec B. Whilst the gauges work once the ignition is switched on, the back lighting for the dials on both gauges does not come on nor can I change the colour on the gauges. The ring around the dials and the needle itself is a very dim red. There is no lighting in the numbers. We've followed the installation instructions and checked that the earth wire is properly grounded and have connected the yellow and red wires to the switched and unswitched (Constant) fuses as per the instructions.
Problem 2: The check engine light has now come, the cruise control icon is now flashing and the intelligent/sports/sports sharp modes are flashing on the dashboard.
Any help at all in solving either or both problems would be greatly appreciated, Cheers.