looking for a radiator, recommendations?

Nearly everything is in here to start with.
If it's about your car, or Subaru's in general, put it in "Subaru Chat".

looking for a radiator, recommendations?

Postby vinshonz » Thu Aug 02, 2018 4:38 pm

hi guys

want to buy a radiator before the stock one splits, i know its a very common problem.

what radiators are you guys running? Koyo? Mishimoto? ebay spec?

found this on ebay https://www.ebay.com.au/itm/Full-Alloy- ... SwqU5ZvyLk

not sure about fitment.,, =/
2008 Liberty GT Tuned by STi 27 of 250 made
PnP VF52, AVO TBE into TCP-Ti Mufflers, AVO panel filter, Mishimoto TMIC, Turbosmart Kompact BOV, Kobe Silicone Intake + SFB, Kobe 340LPH pump,
Tuspeed 3Port, Exedy HD + lightened flywheel, some Whiteline bits & Corgiwerx bits, Zeitronix Flex Fuel Analyser Kit , e85/98 Flex fuel -Got it REX tuned

2007 WRX Tuned by STi 35 of 200 made
STi Spec C TMIC+ProcessWest splitter, AVO TBE, X3E Silicone Intake, APS CAI, TurboSmart Kompact, Walbro, GrimmSpeed 3 Port, DEFI gauges
TD05-18G 198.5kw on RTRs Dyno - SOLD
vinshonz
 
Posts: 257
Joined: Tue Mar 22, 2016 6:53 am
Location: MELB
Car: 2008 Liberty GT TunedBySTi
Real name: Vincent

Re: looking for a radiator, recommendations?

Postby Glexen » Thu Aug 02, 2018 10:56 pm

I've run Mishimoto before and ended up with a pin hole leak and then replaced under warranty. Changed to Koyo radiator now which appears much better quality and no dramas so far.
User avatar
Glexen
 
Posts: 121
Joined: Fri Dec 27, 2013 3:56 pm
Location: Gosford NSW
Car: Subaru 08 Liberty GT STI

Re: looking for a radiator, recommendations?

Postby vinshonz » Fri Aug 03, 2018 3:53 pm

Glexen wrote:I've run Mishimoto before and ended up with a pin hole leak and then replaced under warranty. Changed to Koyo radiator now which appears much better quality and no dramas so far.


Koyo full aluminium or with plastic end tanks?
2008 Liberty GT Tuned by STi 27 of 250 made
PnP VF52, AVO TBE into TCP-Ti Mufflers, AVO panel filter, Mishimoto TMIC, Turbosmart Kompact BOV, Kobe Silicone Intake + SFB, Kobe 340LPH pump,
Tuspeed 3Port, Exedy HD + lightened flywheel, some Whiteline bits & Corgiwerx bits, Zeitronix Flex Fuel Analyser Kit , e85/98 Flex fuel -Got it REX tuned

2007 WRX Tuned by STi 35 of 200 made
STi Spec C TMIC+ProcessWest splitter, AVO TBE, X3E Silicone Intake, APS CAI, TurboSmart Kompact, Walbro, GrimmSpeed 3 Port, DEFI gauges
TD05-18G 198.5kw on RTRs Dyno - SOLD
vinshonz
 
Posts: 257
Joined: Tue Mar 22, 2016 6:53 am
Location: MELB
Car: 2008 Liberty GT TunedBySTi
Real name: Vincent

Re: looking for a radiator, recommendations?

Postby Glexen » Sun Aug 05, 2018 11:15 pm

Full Aluminium 8)
User avatar
Glexen
 
Posts: 121
Joined: Fri Dec 27, 2013 3:56 pm
Location: Gosford NSW
Car: Subaru 08 Liberty GT STI

Re: looking for a radiator, recommendations?

Postby vinshonz » Mon Aug 06, 2018 8:53 pm

Glexen wrote:Full Aluminium 8)


nice but from the prices i could find, their a abit overpriced... ($600) for a radiator =/
2008 Liberty GT Tuned by STi 27 of 250 made
PnP VF52, AVO TBE into TCP-Ti Mufflers, AVO panel filter, Mishimoto TMIC, Turbosmart Kompact BOV, Kobe Silicone Intake + SFB, Kobe 340LPH pump,
Tuspeed 3Port, Exedy HD + lightened flywheel, some Whiteline bits & Corgiwerx bits, Zeitronix Flex Fuel Analyser Kit , e85/98 Flex fuel -Got it REX tuned

2007 WRX Tuned by STi 35 of 200 made
STi Spec C TMIC+ProcessWest splitter, AVO TBE, X3E Silicone Intake, APS CAI, TurboSmart Kompact, Walbro, GrimmSpeed 3 Port, DEFI gauges
TD05-18G 198.5kw on RTRs Dyno - SOLD
vinshonz
 
Posts: 257
Joined: Tue Mar 22, 2016 6:53 am
Location: MELB
Car: 2008 Liberty GT TunedBySTi
Real name: Vincent


Return to General Chat

Who is online

Users browsing this forum: No registered users and 2 guests