What's going on here - trim question

Nearly everything is in here to start with.
If it's about your car, or Subaru's in general, put it in "Subaru Chat".

What's going on here - trim question

Postby BMCracer » Sat Jul 28, 2018 7:52 pm

I have a New Zealand new Legacy ( Liberty ) Spec B 3.0 auto, MY2007. Completely original. Lovely car.

Now, my question relates to the gear lever surround. Check out my one below.

ImageAndrew's Subaru - 25 July 2018 018 by Andrew Metford, on Flickr

Now check out this one. This one is Australian new, same MY2007 as mine. See the extra rectangular silver trim piece and the leather boot around the gear lever? Was that an optional extra when the car was new? Or aftermarket?

Imageauoak67dic8vlfos1isk7yn56 by Andrew Metford, on Flickr
2007 NZ new 3.0 Spec B 5EAT wagon in Brilliant Silver 39D
BMCracer
 
Posts: 77
Joined: Thu May 11, 2017 10:01 am
Location: Perth
Car: NZDM MY07 3.0R Spec B 5eat Wgn
Real name: Andrew

Re: What's going on here - trim question

Postby BMCracer » Sat Jul 28, 2018 9:43 pm

While I'm at it, my NZ car has a single prop rod for the bonnet, old style, that clips down across the front by the radiator. The Aust car has twin gas struts. Are the gas struts legit equipment, or aftermarket stuff?
2007 NZ new 3.0 Spec B 5EAT wagon in Brilliant Silver 39D
BMCracer
 
Posts: 77
Joined: Thu May 11, 2017 10:01 am
Location: Perth
Car: NZDM MY07 3.0R Spec B 5eat Wgn
Real name: Andrew

Re: What's going on here - trim question

Postby vinshonz » Sun Jul 29, 2018 2:14 pm

BMCracer wrote:While I'm at it, my NZ car has a single prop rod for the bonnet, old style, that clips down across the front by the radiator. The Aust car has twin gas struts. Are the gas struts legit equipment, or aftermarket stuff?


my my08 tbsti lib does not have gas struts

as for the lever, i have manual transmission so i cant comment there
2008 Liberty GT Tuned by STi 27 of 250 made
PnP VF52, AVO TBE into TCP-Ti Mufflers, AVO panel filter, Mishimoto TMIC, Turbosmart Kompact BOV, Kobe Silicone Intake + SFB, Kobe 340LPH pump,
Tuspeed 3Port, Exedy HD + lightened flywheel, some Whiteline bits & Corgiwerx bits, Zeitronix Flex Fuel Analyser Kit , e85/98 Flex fuel -Got it REX tuned

2007 WRX Tuned by STi 35 of 200 made
STi Spec C TMIC+ProcessWest splitter, AVO TBE, X3E Silicone Intake, APS CAI, TurboSmart Kompact, Walbro, GrimmSpeed 3 Port, DEFI gauges
TD05-18G 198.5kw on RTRs Dyno - SOLD
vinshonz
 
Posts: 257
Joined: Tue Mar 22, 2016 6:53 am
Location: MELB
Car: 2008 Liberty GT TunedBySTi
Real name: Vincent


Return to General Chat

Who is online

Users browsing this forum: No registered users and 2 guests