New Shocks for Gen 5 & 6 Libs from Shockworks due April 2018

Nearly everything is in here to start with.
If it's about your car, or Subaru's in general, put it in "Subaru Chat".

New Shocks for Gen 5 & 6 Libs from Shockworks due April 2018

Postby Ota » Sun Mar 04, 2018 8:19 am

Hi all,

I have a 2016 Liberty 3.6R, Brett O'Brien of Shockworks has just measured up the car for a new Spring/Shock, they're due late March approx, so a new shock system is not far off to give all Liberty Gen 5 & 6 owners superior dampening. Car will go back once shocks arrive where he will tinker with a variety of springs and gas/oil levels or whatever he does/uses.

My brief, lowered slightly, good for road use, but set up for occasional track days. I have a whitleine roll centre bump steer kit, custom front sway bar from 21mm to 18mm, whiteline rear sway bar 22mm from 16mm stock, but will go down to 20mm as new shocks/springs will do more of that work to give a neutral handling car where front and back are tied in and understeer is controlled, to that end I've adjusted power split from 60/40 front rear to 55/45 to help.

Great to see a local guy whose developed a world class product, check it out, deserves to do very well.
Posts: 2
Joined: Sun Jan 21, 2018 6:20 pm
Car: Liberty 2016 3.6R

Return to General Chat

Who is online

Users browsing this forum: No registered users and 1 guest