Page 1 of 1

'04 liberty headunit

PostPosted: Sun Nov 26, 2017 2:10 pm
by Pak0s
I'm after an aftermarket dounle din headunit for my '04 liberty, I've got a stock McIntosh unit in it at the moment. Would i need a fascia kit with the climate control or just a fascia kit?

Re: '04 liberty headunit

PostPosted: Mon Nov 27, 2017 8:59 pm
by zch91
You can get away with just buying the fascia piece, your existing climate control unit will work just fine.

The best person to speak to is HardwareBoB - he sells them in kit form with wiring adapters to make it fully plug and play.
memberlist.php?mode=viewprofile&u=9994

Re: '04 liberty headunit

PostPosted: Mon Feb 26, 2018 4:54 pm
by jp928
If your Mcintoss is the model integrated with climate control, you need the fascia unit (with double DIN hole) and separate climate control - AVO Japan do them. You probably dont have two temp knobs, so make sure you get the right climate control unit. The fascia I got came with an aerial adapter to go from Suby peculiar to std coax plug.
If the Mcintoss has an amp under the pax seat, you will need a cable from the HU you install to go from the HU down the tunnel and connect to the speaker plug that is currently connected to the amp. Somewhere there is a thread about integrating the Suby steering wheel radio controls with foreign HU when compatible. Lookup svxdc (Dave Carter) on legacygt.com for help - he is very good on this stuff. There is a thread of mine on doing this in an 04 Outback here somewhere.
jp 08 gtb 6mt wagon