FishJr wrote:Please help!
WheelZ wrote:I run 19 x 9.5 but they are +43. Did the math on mine and decided i was gonna have about 5mm poke, so wrapped in some stretched tyres and dropped quite a bit, they're manageable.
At +38 you're gonna have an extra 5mm to deal with - 10mm poke is a bit more significant. If you stretch some tyres over them, 235/35 it might make it look a little less aggressive. The only other way you will manage it is with coilovers and some camber
This is mine as it sits.
HardwareBoB wrote:You will need camber, gaurd roll and pull. You will also need to trim the plastic covers at the front of the rear wheel well, and ether cut or roll the section under that (due to the trailing arm design, the wheel comes forward).
FishJr wrote:Was thinking some fender flares (the simple stick ons) but I can't find any decent ones! Anyone know good links?
Users browsing this forum: No registered users and 6 guests