i have got some mods on order but im also due for my 50k service,there are no warranty concerns but what would you recomend i do first,get it serviced with the mods on or off?
norm
Australian Liberty Owners Club
fit mods or 50k service first
12 posts
• Page 1 of 1
fit mods or 50k service first
by libsti » Sun May 04, 2008 5:42 pm
hi all,
i have got some mods on order but im also due for my 50k service,there are no warranty concerns but what would you recomend i do first,get it serviced with the mods on or off?
norm
i have got some mods on order but im also due for my 50k service,there are no warranty concerns but what would you recomend i do first,get it serviced with the mods on or off?
norm
-
libsti - Posts: 990
- Joined: Sat May 12, 2007 7:44 pm
- Location: chipping norton
by BlackGT » Sun May 04, 2008 6:38 pm
IMO I would think a service wouldn't affect mods nor should mods affect a service so it really doesn't matter. Probably a nicer feeling getting a service and then the icing on the cake with the mods.
Out of curiosity which mods are you getting?
Out of curiosity which mods are you getting?
No longer Comin' through like a funeral all BLACK on BLACK
Now Comin' through like a polar bear at a funeral all WHITE on BLACK
435i Gran Coupé F36
19's, SuperSprint exhaust, BMR Custom Tune
Greater than 275kW's of fun
Used to have
2.0T Blackbeast with clutch
Cat Back Exhaust, CAI, ECUTek, Whiteline Swaybars Black 18's on Bridgestone RE050A's + DBA4000's & Hawk Performance Pads = >180kW of fun
With Dual Flywheel Exedy Clutch for that extra lift
Goodbye - 2011 Harley Davidson Iron 883 - Black on Black
Now Comin' through like a polar bear at a funeral all WHITE on BLACK
435i Gran Coupé F36
19's, SuperSprint exhaust, BMR Custom Tune
Greater than 275kW's of fun
Used to have
2.0T Blackbeast with clutch
Cat Back Exhaust, CAI, ECUTek, Whiteline Swaybars Black 18's on Bridgestone RE050A's + DBA4000's & Hawk Performance Pads = >180kW of fun
With Dual Flywheel Exedy Clutch for that extra lift
Goodbye - 2011 Harley Davidson Iron 883 - Black on Black
-
BlackGT - Posts: 405
- Joined: Thu Oct 12, 2006 4:06 pm
- Location: Sydney North West
- Car: BMW 435i Gran Coupe
by TorpedoCreative » Sun May 04, 2008 7:17 pm
libsti wrote:Out of curiosity which mods are you getting?
new top mount,dump pipie and centre pipe.
what are you getting phil?[/quote]
how do those mods not affect warranty?
James
TEAM BLACK: 6MT Liberty GT-B TbSTi (167/300) stock-ish 
Torpedo Creative [JAMES]
http://www.torpedo.com.au
Torpedo Creative [JAMES]
http://www.torpedo.com.au
-
TorpedoCreative - Posts: 1113
- Joined: Tue Jan 15, 2008 3:00 pm
- Location: Perth Hills
- Car: 07 GT-B Liberty Tuned by STi
- Real name: James
by MY07GT » Sun May 04, 2008 10:23 pm
Meh as long as what ever is damaged is not linked to you're mods then should be fine.... but most likely the easier option for them is to say it does so they dont need to do anything. A risk you run to have the full enjoyment of your vehicle.
PM'd you Norm! Your car will definitely be freed after those mods get a EVC too will you're at it if you dont already have one.
Phil.
PM'd you Norm! Your car will definitely be freed after those mods get a EVC too will you're at it if you dont already have one.
Phil.
-
MY07GT - Posts: 2189
- Joined: Sat Oct 07, 2006 9:29 am
- Location: Sydney
- Real name: Phil
by Arith » Sun May 04, 2008 10:41 pm
MY07GT wrote:get a EVC too will you're at it if you dont already have one.
That was one of the first things he got thanks to you! Very professional install job too! I was very impressed.
[ Former Liberty ... Slightly Modified -> Click here for modifications & profile ]
-
Arith - -stickered-
- Posts: 6111
- Joined: Mon Oct 08, 2007 2:05 am
- Location: Sydney (Wes-Sieed!)
- Car: MY11 Volvo S60 T6
- Real name: Jim
by Arith » Sun May 04, 2008 11:04 pm
Shift Performance in Landsvale. The owner is a friend of his. IS Motors did the configuration and dyno.
At first I thought he got it installed at IS as well, which is why I was a bit disappointed when I didn't get the same slick install.
At first I thought he got it installed at IS as well, which is why I was a bit disappointed when I didn't get the same slick install.
[ Former Liberty ... Slightly Modified -> Click here for modifications & profile ]
-
Arith - -stickered-
- Posts: 6111
- Joined: Mon Oct 08, 2007 2:05 am
- Location: Sydney (Wes-Sieed!)
- Car: MY11 Volvo S60 T6
- Real name: Jim
by PRO20B » Mon May 05, 2008 7:47 pm
Arith wrote:Shift Performance in Landsvale. The owner is a friend of his. IS Motors did the configuration and dyno.
At first I thought he got it installed at IS as well, which is why I was a bit disappointed when I didn't get the same slick install.
Any pics of the install?
Cheers
Daniel
- PRO20B
- Posts: 255
- Joined: Mon Feb 04, 2008 4:22 pm
- Location: Sydney
by libsti » Mon May 05, 2008 8:17 pm
At first I thought he got it installed at IS as well, which is why I was a bit disappointed when I didn't get the same slick install.[/quote]
Any pics of the install?
Cheers
Daniel[/quote]
i dont know how to do all that stuff,im one of the old geezers as jim would say.
Any pics of the install?
Cheers
Daniel[/quote]
i dont know how to do all that stuff,im one of the old geezers as jim would say.
-
libsti - Posts: 990
- Joined: Sat May 12, 2007 7:44 pm
- Location: chipping norton
12 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 5 guests