Australian Liberty Owners Club

Skip to content

SI Drive Cover

Nearly everything is in here to start with.
If it's about your car, or Subaru's in general, put it in "Subaru Chat".
Post a reply

Re: SI Drive Cover

Postby shav » Mon Aug 24, 2015 3:07 pm

peadya100 wrote:Update:
Printed a few more covers for test fitting on the weekend.. want to make certain of the fitment. It was pointed out to me that my current design wouldn't allow for intelligent mode to be selected. Dont know how, but i didn't realise it pushed into the centre console, i thought it there was a gap under the dial. So this means I have to finish the cover a bit short of the centre console. So adjustments are being made :-)


ahh of course. good to know. Thanks for the update
Cheers
Shav

MY07 Subaru Liberty GT Premium Sedan | HKS Panel filter | Pierburg 3 port | Whiteline adj sways F&R | Cusco HD mounts | Whiteline HD front sway links | Anycarlink AL-1080B | Ultrex s/s 3" CBE | Ultrex PU lip spoiler | Invidia s/s dump pipe and 100cel cat | KiDo tuned | DBA T2 rotors | Intima SS brake pads | Mishimoto TMIC | Koya ISR7 wheels | 265L Kobe fuel pump | Diamond Works SI Drive dial | Bilsteins

COSMETIC MODS ON THE WAY

My other toys:
2012 Focus Cayo 2.0 road bike
2015 Cervelo S5 VWD road bike
User avatar
shav
 
Posts: 3609
Joined: Tue Jun 26, 2012 12:01 pm
Location: Adelaide, Southern Suburbs
Car: MY07 Subaru Liberty GT Premium
Real name: Shav
Profile URL: viewtopic.php?f=10&t=18915&start=480
Top

Re: SI Drive Cover

Postby tom_kauf » Mon Aug 24, 2015 3:43 pm

Yes, that would be important to have, even for those that rarely use 'I' mode, since there's no other way of selecting it.
[Stealth & Speed - Comfort & Practicality]: My 2008 MY09 GT SpecB Wagon - Manual 200,000km
User avatar
tom_kauf
-stickered-
 
Posts: 1364
Joined: Thu Sep 26, 2013 1:05 pm
Location: Brisbane, QLD
Car: 2008 Liberty GT SpecB Manual Wagon
Real name: Tom
Top

Re: SI Drive Cover

Postby ferret89 » Mon Aug 24, 2015 4:02 pm

tom_kauf wrote:Yes, that would be important to have, even for those that rarely use 'I' mode, since there's no other way of selecting it.


Yes, didn't even think of that. Not that I use 'I' mode much at all but still would like to keep the option
User avatar
ferret89
 
Posts: 1041
Joined: Sat Aug 11, 2012 5:23 pm
Location: Brisbane, QLD
Car: Liberty MY08 Tuned by STI
Real name: Daniel
Profile URL: viewtopic.php?f=10&t=28511
Top

Re: SI Drive Cover

Postby Mosti » Tue Sep 01, 2015 4:32 pm

Any updates on this?
Mosti
formerly "b4bullet"
 
Posts: 288
Joined: Mon Jul 16, 2007 12:26 am
Location: NSW
Car: TB STi Wagon #43
Top

Re: SI Drive Cover

Postby Manaz » Tue Sep 01, 2015 4:40 pm

Consider me interested. :)
Manaz
 
Posts: 1684
Joined: Sat May 26, 2007 2:45 pm
Location: Sydney, Australia
Car: MY09 Liberty GT Spec.B
Real name: Robert
Profile URL: viewtopic.php?f=10&t=22465
Top

Re: SI Drive Cover

Postby peadya100 » Wed Sep 02, 2015 7:42 am

I've been away for work the past 2 weeks so progress halted unfortunately. I'm going to do another test 3D print this weekend. Making some tweaks to get fitment perfect.
Diamond Works SI-DRIVE Covers - Subaru Liberty/Legacy MY07 to MY09

https://www.facebook...aruDiamondWorks
subaru.diamondworks@gmail.com
User avatar
peadya100
-stickered-
 
Posts: 2243
Joined: Wed Dec 08, 2010 1:21 pm
Location: Norah Head, Central Coast
Car: 2007 Liberty GT-B Wagon
Real name: Adam
Profile URL: viewtopic.php?f=10&t=21072
Top

Re: SI Drive Cover

Postby Reidy » Fri Sep 11, 2015 4:10 pm

How'd the test fit go?
Reidy
 
Posts: 72
Joined: Mon Nov 10, 2014 2:13 am
Location: Melbourne
Car: 08 Turbo Wags
Top

Re: SI Drive Cover

Postby peadya100 » Fri Sep 11, 2015 9:42 pm

Still not happy with it. Want to reduce the diameter a bit more to make it a snugger fit. Was inter state all week with work so will do another test piece next week.
Diamond Works SI-DRIVE Covers - Subaru Liberty/Legacy MY07 to MY09

https://www.facebook...aruDiamondWorks
subaru.diamondworks@gmail.com
User avatar
peadya100
-stickered-
 
Posts: 2243
Joined: Wed Dec 08, 2010 1:21 pm
Location: Norah Head, Central Coast
Car: 2007 Liberty GT-B Wagon
Real name: Adam
Profile URL: viewtopic.php?f=10&t=21072
Top

Re: SI Drive Cover

Postby peadya100 » Sun Sep 13, 2015 10:57 am

SI Driver Cover Update.
Apologies for the wait guys. Been interstate a lot with work the past few weeks, so progress came to a screaming halt. I will be 3D printing 1 more model on monday to get the diameter right. It's still a tiny bit too sloppy a fit for my tastes. Then I'll buy the double sided tape to test fit and adjust for that. All of that will happen in the next 7 days. Thanks for being patient everyone!!
Diamond Works SI-DRIVE Covers - Subaru Liberty/Legacy MY07 to MY09

https://www.facebook...aruDiamondWorks
subaru.diamondworks@gmail.com
User avatar
peadya100
-stickered-
 
Posts: 2243
Joined: Wed Dec 08, 2010 1:21 pm
Location: Norah Head, Central Coast
Car: 2007 Liberty GT-B Wagon
Real name: Adam
Profile URL: viewtopic.php?f=10&t=21072
Top

Re: SI Drive Cover

Postby ferret89 » Sun Sep 13, 2015 11:30 am

peadya100 wrote:SI Driver Cover Update.
Apologies for the wait guys. Been interstate a lot with work the past few weeks, so progress came to a screaming halt. I will be 3D printing 1 more model on monday to get the diameter right. It's still a tiny bit too sloppy a fit for my tastes. Then I'll buy the double sided tape to test fit and adjust for that. All of that will happen in the next 7 days. Thanks for being patient everyone!!


No worries Adam, no hurry we appreciate all the work you are putting into this
User avatar
ferret89
 
Posts: 1041
Joined: Sat Aug 11, 2012 5:23 pm
Location: Brisbane, QLD
Car: Liberty MY08 Tuned by STI
Real name: Daniel
Profile URL: viewtopic.php?f=10&t=28511
Top

Re: SI Drive Cover

Postby tom_kauf » Sun Sep 13, 2015 12:03 pm

peadya100 wrote:SI Driver Cover Update.
Apologies for the wait guys. Been interstate a lot with work the past few weeks, so progress came to a screaming halt. I will be 3D printing 1 more model on monday to get the diameter right. It's still a tiny bit too sloppy a fit for my tastes. Then I'll buy the double sided tape to test fit and adjust for that. All of that will happen in the next 7 days. Thanks for being patient everyone!!

No problem Adam, it's better to get it right. That's worth waiting for 8)
[Stealth & Speed - Comfort & Practicality]: My 2008 MY09 GT SpecB Wagon - Manual 200,000km
User avatar
tom_kauf
-stickered-
 
Posts: 1364
Joined: Thu Sep 26, 2013 1:05 pm
Location: Brisbane, QLD
Car: 2008 Liberty GT SpecB Manual Wagon
Real name: Tom
Top

Re: SI Drive Cover

Postby Jackson1 » Sun Sep 13, 2015 10:05 pm

Agreed! Your doing a brilliant job :)
viewtopic.php?f=10&t=30201&p=408333#p408333
User avatar
Jackson1
 
Posts: 61
Joined: Thu Nov 27, 2014 10:35 pm
Location: Canberra
Car: Subaru Liberty STI MY08 Wagon Black
Real name: Jacko
Profile URL: viewtopic.php?f=10&t=30201&p=408333#p408333
Top

Re: SI Drive Cover

Postby shav » Mon Sep 14, 2015 9:38 am

2 thumbs up from me Adam. Get it right the first time. Thanks for keeping us in the loop.
Cheers
Shav

MY07 Subaru Liberty GT Premium Sedan | HKS Panel filter | Pierburg 3 port | Whiteline adj sways F&R | Cusco HD mounts | Whiteline HD front sway links | Anycarlink AL-1080B | Ultrex s/s 3" CBE | Ultrex PU lip spoiler | Invidia s/s dump pipe and 100cel cat | KiDo tuned | DBA T2 rotors | Intima SS brake pads | Mishimoto TMIC | Koya ISR7 wheels | 265L Kobe fuel pump | Diamond Works SI Drive dial | Bilsteins

COSMETIC MODS ON THE WAY

My other toys:
2012 Focus Cayo 2.0 road bike
2015 Cervelo S5 VWD road bike
User avatar
shav
 
Posts: 3609
Joined: Tue Jun 26, 2012 12:01 pm
Location: Adelaide, Southern Suburbs
Car: MY07 Subaru Liberty GT Premium
Real name: Shav
Profile URL: viewtopic.php?f=10&t=18915&start=480
Top

Re: SI Drive Cover

Postby peadya100 » Mon Sep 14, 2015 5:51 pm

Latest test piece printed today. Internal diameter fitment is bang on where I want it to be! Now just need to buy the double sided tape and adjust the height to suit. Then we're in business :good:
Diamond Works SI-DRIVE Covers - Subaru Liberty/Legacy MY07 to MY09

https://www.facebook...aruDiamondWorks
subaru.diamondworks@gmail.com
User avatar
peadya100
-stickered-
 
Posts: 2243
Joined: Wed Dec 08, 2010 1:21 pm
Location: Norah Head, Central Coast
Car: 2007 Liberty GT-B Wagon
Real name: Adam
Profile URL: viewtopic.php?f=10&t=21072
Top

Re: SI Drive Cover

Postby shav » Mon Sep 14, 2015 5:52 pm

peadya100 wrote:Latest test piece printed today. Internal diameter fitment is bang on where I want it to be! Now just need to buy the double sided tape and adjust the height to suit. Then we're in business :good:

YESSSS
Cheers
Shav

MY07 Subaru Liberty GT Premium Sedan | HKS Panel filter | Pierburg 3 port | Whiteline adj sways F&R | Cusco HD mounts | Whiteline HD front sway links | Anycarlink AL-1080B | Ultrex s/s 3" CBE | Ultrex PU lip spoiler | Invidia s/s dump pipe and 100cel cat | KiDo tuned | DBA T2 rotors | Intima SS brake pads | Mishimoto TMIC | Koya ISR7 wheels | 265L Kobe fuel pump | Diamond Works SI Drive dial | Bilsteins

COSMETIC MODS ON THE WAY

My other toys:
2012 Focus Cayo 2.0 road bike
2015 Cervelo S5 VWD road bike
User avatar
shav
 
Posts: 3609
Joined: Tue Jun 26, 2012 12:01 pm
Location: Adelaide, Southern Suburbs
Car: MY07 Subaru Liberty GT Premium
Real name: Shav
Profile URL: viewtopic.php?f=10&t=18915&start=480
Top
PreviousNext
Post a reply

Return to General Chat

Who is online

Users browsing this forum: No registered users and 4 guests

Powered by phpBB® Forum Software © phpBB Group