hks evc settings

by **senator** » Mon Dec 22, 2008 8:47 am

gents

getting my ebc (thanks to louey) fitted by the one and only phat gt...... got a few q's from the members who have had a ebc fitted...

1) where have you guys mounted/stored it?..... (i remeber seeing arith's in the cubby)

2) what have you guys set for A and B,??? i am thinking A set to 15 psi and B set to 17 psi. then once the dp and centre pipe a done and a tune............

btw the only mods a hks panel filter, zerosports in take pipe and avo tmic.

by **MY07GT** » Mon Dec 22, 2008 11:36 am

Pm'd ya!

Mine is hiding in the cubby so i can close it when i park.

Phil.

by **Arith** » Mon Dec 22, 2008 2:28 pm

Tony, as Phil mentioned, most of us have it in the cubby hole so that it can remain out of site when not in use. I'm looking for that stand that I see some JDM cars have for their EVC's.

As for boost settings, I have my A Boost at 1.0 bar (14.5 psi). With your mods, I'd recommend 1.1 bar (15.9 psi) for B Boost for safety reasons. Once your mods list grows a bit more (ie- exhaust), you can probably push it to 1.2 bar (17.4 psi).

by **PRO20B** » Mon Dec 22, 2008 2:35 pm

I reckon 1 bar for A and 1.3 bar for B

Well at least that is what i intend on setting mine at when it arrives.

Cheers
Daniel

by **Mano™** » Mon Dec 22, 2008 3:04 pm

Think frankies is in the umm where ur drinks go.. but ur model doesn't have the lid to close it huh? so that maybe no good! That is where mine will go

by **XRC15T** » Mon Dec 22, 2008 10:44 pm

What EVC? I don't see no EVC.... its stock :assassin:

Btw each car is very different subject to what other toys you have in your car. Safest way is to throw on a dyno and then adjust it.

Otherwise stay on the conservative side to be safe.

by **Arith** » Mon Dec 22, 2008 10:47 pm

Heh-heh. What Franky said.

Tony, once you get the EVC installed, just take yourself to IS Motors and have Indy tune it for you on the dyno. That should determine the max psi your car can handle safely with it's current mods.

by **gtspec** » Tue Dec 23, 2008 7:09 am

were would you guys recommend to mount it when you have sat nav :cry:

by **XRC15T** » Tue Dec 23, 2008 7:13 am

anywhere within a arms reach.

by **senator** » Tue Dec 23, 2008 8:39 am

Arith wrote:Heh-heh. What Franky said.

Tony, once you get the EVC installed, just take yourself to IS Motors and have Indy tune it for you on the dyno. That should determine the max psi your car can handle safely with it's current mods.

thank jim... i will save dyno time and $$$ for when the real tune happens....

cubby seems to be the best place to mount it.........seems like i will have to ditch the idea of mounting the greddy touch there.

hks evc settings

hks evc settings

Who is online