club.liberty.asn.au

Hey guys, I tried searching but couldn't dig up anything, probably just the wrong search term.

I'm buying some wheels in 17x7 +42 offset.

Is this an ok offset? I don't want rubbing issues since I've lowered the car now

Thanks in advance

They should fit easily.

awesome. I got a bit worried seeing the stockies are +55

cant wait to get them now

What wheels u gettin John?

It'll be fine, I was running 18x7.5 +42 in the past.

lenso dc6 v2 in black with a polished lip

Getting some 5mm spacers water jet cut for the car.
Can't find spacers locally and these are being done for nothing.
So effectively will be running 37 offset

correct me if i'm wrong, but if you add a 5mm spacer, won't it make it a +32? as the wheel is only being offset on one side?

overl0ad wrote:correct me if i'm wrong, but if you add a 5mm spacer, won't it make it a +32? as the wheel is only being offset on one side?

No, I don't think so. It'll move it outwards by 5mm, turning +42 to +37mm.

Yeh both sides are taking 5mm but that only comes off the offset each side.
Basically increasing track by 10mm overall. I'm thinking guard rolling is needed on the rear as it's close as is

castek wrote:Yeh both sides are taking 5mm but that only comes off the offset each side.
Basically increasing track by 10mm overall. I'm thinking guard rolling is needed on the rear as it's close as is

More camber!

Yeh thinking 2degrees front and 1.5 rear

Have you fitted these? I'm interested how +37 works with a lowered car.

Next weekend Car is getting serviced so maybe during that week. Pick the spacers up next saturday

What size tyres are you running?
That will be one of the main factor's if they rub.

Any reason you got 7" wide and that offset?
Could of gone wider in a different offset and not worried about spacers.