Page 1 of 1
USDM vs AUDM Shocks
Posted:
Thu Jul 22, 2010 3:21 pmby mihai
Does anyone know if there is a difference between the USDM and AUDM shocks that are not running on Bilstein's? If yes, what is it?
Thanks.
Re: USDM vs AUDM Shocks
Posted:
Fri Jul 23, 2010 7:36 amby overl0ad
rear same, front different
essentially their left is our right, so spring rates, damping, the little HiD bolt thing, brake line holder
no idea if will fit.
Re: USDM vs AUDM Shocks
Posted:
Fri Jul 23, 2010 9:00 amby jdm rsk
Also I would suspect the valving would be different due to their better roads. I know my jdm ones are valved different due to their superior roads
Re: USDM vs AUDM Shocks
Posted:
Fri Jul 23, 2010 11:48 amby mihai
Ah k. Thanks for that info. Reason i asked was because i bought a set of H&R's and i checked the H&R site in regards to the part number only to find out after installing that the ones i had were for the USDM Liberty.
Re: USDM vs AUDM Shocks
Posted:
Fri Jul 23, 2010 6:00 pmby overl0ad
for tiens...
the AUDM stuff is generally one down from the JDM stuff i've been told.