Springs, shock absorbers, swaybars,
Brakes, Wheels and Tyres
by mihai » Thu Jul 22, 2010 3:21 pm
Does anyone know if there is a difference between the USDM and AUDM shocks that are not running on Bilstein's? If yes, what is it?
Thanks.
[New: MY11 FPV F6 | Winter White | Pioneer DEX-P99RS | Alpine PDX-F6 | Alpine PDX-M12 | JL Audio 12W7-AE ]
[Old: MY07 2.0R | Urban Grey | 5 MT | 6000k HID | LED | Alpine IVA-W502E | Alpine PDX1.1000 | Alpine PDX4.150 | JL Audio 12W7v3 | Focal KRX2 ]
-

mihai
-
- Posts: 1641
- Joined: Mon Jun 01, 2009 10:27 pm
- Location: Melbourne, VIC
- Car: MY07 Liberty 2.0R + MY11 FPV F6
- Real name: Michael
by overl0ad » Fri Jul 23, 2010 7:36 am
rear same, front different
essentially their left is our right, so spring rates, damping, the little HiD bolt thing, brake line holder
no idea if will fit.
tangcla wrote:I didn't have to. I have girly Asian hands

-

overl0ad
-
- Posts: 1091
- Joined: Wed May 16, 2007 8:46 pm
- Location: Mel-burn!!!
- Car: MY07 GTB 6MT *sold*
- Real name: Gerald
by jdm rsk » Fri Jul 23, 2010 9:00 am
Also I would suspect the valving would be different due to their better roads. I know my jdm ones are valved different due to their superior roads
-

jdm rsk
- formerly legacy rsk
-
- Posts: 4026
- Joined: Sat Oct 07, 2006 10:04 am
- Location: Sydney, Australia, Kasuga City Fukuoka Japan
- Car: MY 11 VW Golf GTI ED35
- Real name: Shane
by mihai » Fri Jul 23, 2010 11:48 am
Ah k. Thanks for that info. Reason i asked was because i bought a set of H&R's and i checked the H&R site in regards to the part number only to find out after installing that the ones i had were for the USDM Liberty.
[New: MY11 FPV F6 | Winter White | Pioneer DEX-P99RS | Alpine PDX-F6 | Alpine PDX-M12 | JL Audio 12W7-AE ]
[Old: MY07 2.0R | Urban Grey | 5 MT | 6000k HID | LED | Alpine IVA-W502E | Alpine PDX1.1000 | Alpine PDX4.150 | JL Audio 12W7v3 | Focal KRX2 ]
-

mihai
-
- Posts: 1641
- Joined: Mon Jun 01, 2009 10:27 pm
- Location: Melbourne, VIC
- Car: MY07 Liberty 2.0R + MY11 FPV F6
- Real name: Michael
by overl0ad » Fri Jul 23, 2010 6:00 pm
for tiens...
the AUDM stuff is generally one down from the JDM stuff i've been told.
tangcla wrote:I didn't have to. I have girly Asian hands

-

overl0ad
-
- Posts: 1091
- Joined: Wed May 16, 2007 8:46 pm
- Location: Mel-burn!!!
- Car: MY07 GTB 6MT *sold*
- Real name: Gerald
Return to Suspension, Brakes, Wheels and Tyres.
Who is online
Users browsing this forum: No registered users and 2 guests