club.liberty.asn.au

So I was wondering if any one knew if there was a difference between GT Spec.B vs GT Spec.B tuned by STI OEM Sway bars (on an MY07).

Are the sways all part of the Spec B kit or have STI changed them?

Basically I'm wondering if it's gonna make any difference installing a set of second hand sways from an STI onto my GT Spec B.

Measure the diameter and that'll give you the most obvious difference. A thicker bar will be stiffer than a thinner one. Also have a look at the mounting bushes to see if they are made of a harder material.

GT Spec.B vs GT Spec.B tuned by STI OEM Sway bars (on an MY07)

same same

There is no difference in the sway bars.

Thanks guys. Lucky I found this out as I was about to buy Dwayne's second hand STI sway bars. I'd end up spending $300 installing something that's older than what I already have!

Now to put in that order for Whitelines...

Sheik Jabooti wrote:
Now to put in that order for Whitelines...

Best $400 you'll spend!

Sheik Jabooti wrote:Thanks guys. Lucky I found this out as I was about to buy Dwayne's second hand STI sway bars. I'd end up spending $300 installing something that's older than what I already have!

Now to put in that order for Whitelines...

Scuse me, I'm off to Bunnings - what colour would you like your "Whitelines"

The Whitelines make a huge difference (thanks to WhiteGTB for the group buy).

No more of that soggy feel round corners.

Don't forget wheel alignment and camber settings. Will make for a much better drive.

Just put mine on on the weekend (stiffest setting). Sits very flat now. Nice, very nice. Should come this way from the factory. $80 and one hour to fit them at the local service station. Easy...aka lazy.

GT25 wrote:Don't forget wheel alignment and camber settings. Will make for a much better drive.

What's the story with this...do I need to change something here as a result of the stiffer bars?

you dont have to to but I would highly recommend it. a bit of neg camber on the front wheels will make the most of the sway bar mod.

GTSPECB STI wrote:you dont have to to but I would highly recommend it. a bit of neg camber on the front wheels will make the most of the sway bar mod.

+1

GT25 wrote:

GTSPECB STI wrote:you dont have to to but I would highly recommend it. a bit of neg camber on the front wheels will make the most of the sway bar mod.

+1

Cost?

how much neg camber?

markii wrote:

GT25 wrote:

GTSPECB STI wrote:you dont have to to but I would highly recommend it. a bit of neg camber on the front wheels will make the most of the sway bar mod.

+1

Cost?

Have a chat with Heasmans's suspension at Sydenham. They're suspension wizards.

cost me $132 for an alignment 4 or 5 weeks ago