club.liberty.asn.au

Hi Guys,

I've been considering putting a set of brembos on the front of wifeys MY06 tb STi.

At the same time upgrading the rotors (front and rear) and new pads, braided lines etc.

my question would be - will this screw with any of the ABS/BA systems? was going to get it done by the foremost brake expert in QLD - Trevor Sullivan at BDA Labrador

So yeah - just want to ensure it's not going to screw the car up in any way?

Cheers,

Matt

Better to ask Trevor than on here, but no, it won't screw the car up.

Naw, it won't screw up anything. Many MY04-MY06 Libertys have done this conversion/upgrade already.

i just fitted front and rear brembo's and the ABS works very nice still.

hi matt,
no need to worry,i fitted front brembos and then about 8 weeks later fitted the rear,been on the car about 3 months in total and no change to abs at all,only change has been the great stopping power i have now.

norm

so can anyone give me a definitive answer as to what is required for fitting the front and rear brembo setup to my GTB?

Need a good DIY for this...

Here's a repeat of my post from a similar question...

Talk to Tony Dunn at vsport;

http://www.vsport.com.au/ecommerce/index.php?categoryID=147

Brembo kits for Liberty. Everything supplied in kit. Very slight mod required to fit rear callipers.








From King of Parts (US) site.



Excellent result.