Advan Connoseir Charcoal

by **RXWAG** » Thu Apr 16, 2009 3:52 pm

Some of you guys may be interested in these....you have to login into perth wrx but sounds like there is a set on there for sale...

read the thread below

http://www.rexnet.com.au/forum/index.ph ... pic=103743

by **GTSPECB STI** » Thu Apr 16, 2009 4:40 pm

hahahahah yep they have been for sale for quite a while and I have seen them. I think Jimmy S even looked at buying them but he had concerns about fitment.

by **RXWAG** » Thu Apr 16, 2009 4:55 pm

GTSPECB STI wrote:hahahahah yep they have been for sale for quite a while and I have seen them. I think Jimmy S even looked at buying them but he had concerns about fitment.

yeah right...they are an awesome looking rim!! what offset and width are the guys running who have them on here?

by **GTSPECB STI** » Thu Apr 16, 2009 5:47 pm

I believe Arith is the only one with these wheels on a Lib currently http://forum.liberty.asn.au/viewtopic.p ... ight=advan

A mate of mine here in Perth also ran them for a short while from memory.
His user name was Explicit but he has since sold the car.

Hawt wheels for sure.

by **Boxer** » Thu Apr 16, 2009 7:05 pm

Definitley the best wheels I have seen on a Liberty. And the only ones I'd change the Enkies for

If I had stock B Spec wheels though - they would have to go

by **smythie** » Thu Apr 16, 2009 7:16 pm

Doesn't Resonate have a set as well?

by **Jimmy S** » Thu Apr 16, 2009 7:34 pm

Dave is correct!

I was keen as to buy this set, especially for the price!... however, after looking into it a bit more, the offset of this particular set is significantly lower than other Liberty owners are running!

Basically they should be a +48 offset to suit the Liberty, and this set is +35 meaning they will stick WELL out of the guards...

Given that I don't even want to be running coilovers at the minute, and don't really want the hassle of massive amounts of rubbing anyway, I decided to get a different set...

Hence the Oz UltraLeggera's... Which I think still look great, are light and suit the car nicely!

by **Resonate** » Thu Apr 16, 2009 11:55 pm

I wish!

what offset and width are the guys running who have them on here?

8.5" +50.

by **dwayne** » Fri Apr 17, 2009 7:10 pm

So do the +35's clear Brembo's, or do you need the +48's ? Jim ??

What's the price (yes I'm a lazy bugger who can't be bothered signing up just to find out I can't afford them)

Cheers

Dwayne

by **UrbanGTB** » Fri Apr 17, 2009 7:12 pm

The only fitment that fits are the +55mm offset 19x8.5" They fit but they need the guards massaged to fit

by **GTSPECB STI** » Fri Apr 17, 2009 7:25 pm

dwayne wrote:So do the +35's clear Brembo's, or do you need the +48's ? Jim ??

What's the price (yes I'm a lazy bugger who can't be bothered signing up just to find out I can't afford them)

Cheers

Dwayne

I think $2400 from memory but he would knock a bit off I reckon

by **Jimmy S** » Fri Apr 17, 2009 7:36 pm

from negotiating with him prior to figuring out it will need effort and a lot of mucking around to get them onto a lib I would say he wants close to the $2400 asking price... Pretty sure he is trying to cover the cost of buying them himself!

by **smythie** » Fri Apr 17, 2009 8:06 pm

dwayne wrote:So do the +35's clear Brembo's, or do you need the +48's ? Jim ??

What's the price (yes I'm a lazy bugger who can't be bothered signing up just to find out I can't afford them)

Cheers

Dwayne

+35 will clear the calipers better than +48 or +55. You've still got issues with guard clearance as others have mentioned

by **Resonate** » Fri Apr 17, 2009 8:26 pm

The only fitment that fits are the +55mm offset 19x8.5" They fit but they need the guards massaged to fit

That spec is +50 max.

by **UrbanGTB** » Fri Apr 17, 2009 8:33 pm

There are no problems clearing brembo's with the +55mm

Advan Connoseir Charcoal

Advan Connoseir Charcoal

Who is online