Hi guys,
I'm in a bit of a pickle tonight. I was preparing my front Bilstein shock that had been repaired by CorgiWerx to be reassembled and decided to clean it out first before re greasing.
I thought it would be a good idea to swish a bit of wax and grease remover in there to get out any crap once I'd done what I could with a rag, this was my mistake.
When I went to blow out the wax and grease remover with compressed air, the felt ring that sits under the lower guide sleeve inside the housing fell out into my hand.
Now somehow I either need to glue it back in there or risk running without it.
Any opinions on how important this felt ring is & suggestions of what to use would be appreciated.
Cheers