club.liberty.asn.au

CorgiWerx has developed the technology to replace the broken stud at the top of the BILSTEIN inverted struts.
Should you suffer a broken bolt, you now have the option to send the strut to CorgiWerx for repair.
The old broken stud will be removed and replaced with a 12.9 high tensile thearded fastener.
Contact CorgiWerx.
https://postimg.cc/Q9cLfbM6

Okay,

If you have a broken stud at the top of the Bilstein Strut, then the best cost option is to disassemble the strut assembly, remove the Shock Insert and send the insert to CorgiWerx for repalir.
The Shock insert weighs about 1.3kg

Posted Melbourne - Monday
Received Sydney - Wednesday
Repaired Wednesday
Posted Sydney - Thursday
Received Melbourne - Friday