ROTORS FOR A MY07 2.5I

by **LT5PLA** » Thu Sep 18, 2008 2:29 pm

Hi guys its time for me to upgrade the brakes on my my07 liberty 2.5i..
im looking at getting drilled rotors for the front maybe dba's? ill leave the rear rotors stock.. so im asking if anyone can recomend a place to go in sydney that can do em for a fairly good price.. ill need my brake pads changed to.
thanks

by **senator** » Thu Sep 18, 2008 2:33 pm

if want them for performance ......stay away from drilled, they form cracks over time... slotted a far better..... of course try Phat gt for some dixcel rotor and even pads.

by **AdamW** » Thu Sep 18, 2008 4:41 pm

Yeah stay away from cross drilled rotors.. They are only rated for moderate driving styles.. I ended up fitting the EBC Turbo Groove Brake Rotors. They are slotted with dimple hole construction - "The blind drilled holes break down surface gases when braking from speed but do not weaken the rotor cross section as can happen with through drilling, thereby lessening the chance of rotors cracking over time and heavy use."

by **swingn** » Thu Sep 18, 2008 5:12 pm

DBA's are a pretty good thing. Currently running DBA 4000's on my fronts & they do the job. They are a slotted jobbie & are ment to be a club racing spec (Which I don't believe by the way).

In saying that, I will be updating all 4 discs to Dixels with matching pads in the not too distant future

I've got to ask, are your discs worn out? If so, then an upgrade is a good option, if not, just get some sh!t hot pads. It might give you the extra stopping power you want.

+1 to talking to Phat about getting the Dixels, otherwise most brake places such as ABS can get you the DBA's.

by **LT5PLA** » Sat Oct 11, 2008 9:12 pm

Where in syd can i go to get good pads and rotors? at a decent price!!!

by **overl0ad** » Sun Oct 12, 2008 8:46 am

just PM phat,

he can sort you out.

by **overl0ad** » Tue Nov 04, 2008 10:10 am

hey LT5PLA,

what did you end up doing with this?

ROTORS FOR A MY07 2.5I

ROTORS FOR A MY07 2.5I

Who is online