stock end links, will they last long?????

[senator]

Lads

have finally fitted my cusco gear on the weekend and result is very noice thanks Phat for supply ...... but yet to do some track time with them......., but a few nice corners on the way home felt very firm and the car is so quick to reposed to any change in direction.

My question is , how many ppl have updated the end links???
results?
brand?

I know some end links can be loud, but I don't think those match sticks Subaru call end links will last long.......

cheers

[gtspec]

noise? what type? and when does the noise occur..

im looking for some cusco gear and didnt realise it will produce noise?

[senator]

noise? what type? and when does the noise occur..

im looking for some cusco gear and didnt realise it will produce noise?

i was refering to the after market endlinks, they make a clunking noise

[AdamW]

I was sent this by my mechanic when I made some enquiries about sway bars.. I have heard of a few cases where the stock ones have busted in time..

“SWAY BAR LINK KIT
KLC39 - Swaybar link kit-spherical rod end adj extra h/duty - Front - $158.80
KLC044 - Swaybar link kit-spherical rod end adj extra h/duty - Rear - $189.60

I have included a pic of the KLC39 / 044 Spherical Links for you.
these are what Whiteline recommend to use when you upgrade the sway bars,
this is due to the increase in load the sway bars will induce on the standard components..
even though it is not mandatory it is advisable to fit them as well...”

I guess if you drive your car pretty hard (or do track days) you should get them.. I live in the Gold Coast hinterland, so I will definitely be getting them, but if you live in the city and don’t do a lot of higher speed cornering it might not be such an issue..

[Q]

I wouldn't be getting the Whiteline endlinks unless you want very annoying rattling one's because thats what they will be in a short period of time. Much better to get the AVO/Perrin/Kartboy etc.

Try google for problems with the whiteline ones.

[overl0ad]

i got some if you want.

$300 for the set at your door.

clicky my sig for manufacturer's site.

[senator]

i got some if you want.

$300 for the set at your door.

clicky my sig for manufacturer's site.

mmmmm which type? you have 5 different one listed.

will i hear them....

[PHAT GT]

the stock ones may look weak but not so

but in saying that aftermarket ones will improve longeverty

whiteline end links SUX ...there noisy and i have broken 1 or 2 using a 26mm front bar


i have now made my own using high grade S/S nylon lined spherical rod ends ...no noise and super strong

[overl0ad]

i got some if you want.

$300 for the set at your door.

clicky my sig for manufacturer's site.

mmmmm which type? you have 5 different one listed.

will i hear them....

these are the front ones.
http://www.groupa.ca/PR_end_link_long.html

these are the matchinf front ones.
http://www.groupa.ca/PR_end_link_short.html

if u in melb, can pick up.

[CJ1177]

i have now made my own using high grade S/S nylon lined spherical rod ends ...no noise and super strong

Are you up for making any more, by any chance

[AdamW]

i have now made my own using high grade S/S nylon lined spherical rod ends ...no noise and super strong

Are you up for making any more, by any chance

+1

[senator]

i have now made my own using high grade S/S nylon lined spherical rod ends ...no noise and super strong

Are you up for making any more, by any chance

+1

bloody hell Phat, get your shit together and commercialize your gear mate.....and hurry up too

did you get them machine?...... got the tooling paths by any chance?

pm sent

[senator]

the stock ones may look weak but not so

but in saying that aftermarket ones will improve longeverty

whiteline end links SUX ...there noisy and i have broken 1 or 2 using a 26mm front bar


i have now made my own using high grade S/S nylon lined spherical rod ends ...no noise and super strong

so those match sticks can be trusted for a "little bit of time" until you get your shit sorted

[PHAT GT]

i have now made my own using high grade S/S nylon lined spherical rod ends ...no noise and super strong

Are you up for making any more, by any chance

+1

bloody hell Phat, get your shit together and commercialize your gear mate.....and hurry up too

did you get them machine?...... got the tooling paths by any chance?

pm sent

My links are still in the testing stage

let me just say the best Japanese ones i could find cost about $580 a set of 4

mind cost a tad of the whiteline ones but way better meterals