club.liberty.asn.au

Ladies and gentlemen, 2 kits have arrived via air freight (1 set already sold) and 8 more coming via sea freight.

Unfortunately, I've had to pay a lot more for these due to our poor dollar, so I'm going to have to pass this cost onto you as I don't make much on them at all. The new price will be $2150 + $180(airfreight) + $60 for interstate courier.

Please send me a PM to confirm your order asap as they won't last long.

Both airfreighted kits have been sold and sent out.

Taking deposits for 8 sea freight sets now.

Haven't had much of a chance to really test out the new shocks as I'm working night shift at the moment. First impression however are very positive. The ride is a little busier than the stock setup but still nicely compliant over broken surfaces, even tram tracks. There has been a dramatic improvement in road holding and control both front and back. Settings are unchanged so far. I am assuming they are set to softest.

Thanks again to Owen. He was great to deal with and pretty much organised everything for me.

Only pain in the ass was when I tried to jack the rear up to fit some avo HD rear sway bar mounts and I couldn't get the jack past the exhaust to get under the diff. Its a bit lower.

Guys, just received a call. 8 sets are due to land on Monday.

Please send through your order confirmations to secure a set asap. Thanks

owen wrote:Ladies and gentlemen, 2 kits have arrived via air freight (1 set already sold) and 8 more coming via sea freight.

Unfortunately, I've had to pay a lot more for these due to our poor dollar, so I'm going to have to pass this cost onto you as I don't make much on them at all. The new price will be $2150 + $180(airfreight) + $60 for interstate courier.

Please send me a PM to confirm your order asap as they won't last long.

Dont forget to update first post

Also it is $180 for airfreight but was the extra as you're getting a number by sea?

Thanks Owen

The 8 sets arriving on Monday don't carry the $180 air freight charge.

Any thing available from your company on the 5thgen platform?

Thought i'd post here in case it helps anyone else out in the same predicament as myself.

Jumped under the car this morning to tinker with the front adjustment to bring it back to zero. Unfortunately somehow the adjustment knob on the front right has been sheared off while driving leaving me with no way of adjusting.

Does anyone know of an alternative way i can adjust the settings? There is the smallest amount of the tiny "pin" still sticking out but i can't find anything that will grip it hard enough to turn :S

Cheers in advanced.
Ian

Hi Owen, what's the current price on these I would be looking for a set shipped to Ireland so just trying price up my options of coilovers and these were recommended by a few guys on here.

Bezzza wrote:Thought i'd post here in case it helps anyone else out in the same predicament as myself.

Jumped under the car this morning to tinker with the front adjustment to bring it back to zero. Unfortunately somehow the adjustment knob on the front right has been sheared off while driving leaving me with no way of adjusting.

Does anyone know of an alternative way i can adjust the settings? There is the smallest amount of the tiny "pin" still sticking out but i can't find anything that will grip it hard enough to turn :S

Cheers in advanced.
Ian

Hey Ian, have you received the new adjuster yet?

legacydan wrote:Hi Owen, what's the current price on these I would be looking for a set shipped to Ireland so just trying price up my options of coilovers and these were recommended by a few guys on here.

Can you please shoot me an email with your address? I'll get a shipped price for you today

owen wrote:

Bezzza wrote:Thought i'd post here in case it helps anyone else out in the same predicament as myself.

Jumped under the car this morning to tinker with the front adjustment to bring it back to zero. Unfortunately somehow the adjustment knob on the front right has been sheared off while driving leaving me with no way of adjusting.

Does anyone know of an alternative way i can adjust the settings? There is the smallest amount of the tiny "pin" still sticking out but i can't find anything that will grip it hard enough to turn :S

Cheers in advanced.
Ian

Hey Ian, have you received the new adjuster yet?

Hi Owen,

Yep received the new adjuster in record time from Auspost thanks!
Should have time this weekend to get the wheel off and replace the broken one.

Brett is a really awesome guy and super prompt with replies/information. Couldn't ask for better customer service

Ian

Had shockworks coilovers installed today by Race Line Motorsports in Nunawading. I didn't get a chance to go for a spirited drive as I left @ 4pm (peak traffic on way home). I went home the same way I arrived and I could definitely feel the difference compared to my re-valved OE Bilstein shocks / Eibach springs setup. Ride is a hell of a lot smoother yet firm at the same time, less body roll, massive, massive improvement. . Ray set them up 3-4 clicks above fully soft, and about 10mm lower FRT/Back then the Bilstein shocks /eibach springs setup (need to update avatar with pic of front with new ride height).

Big shout out to Justin who sold them to me for a good price and for spending most of the today with me in the waiting room... Also Big shout out to Owen for hooking me up with Race Line for the installation. They did a fantastic job with the install but forgot to put the height adjustment spanners back in the box with the old shocks ...

Another Happy Shockworks Coilover customer. Can't wait to go for a spirited drive.

3rspecb wrote:Had shockworks coilovers installed today by Race Line Motorsports in Nunawading. I didn't get a chance to go for a spirited drive as I left @ 4pm (peak traffic on way home). I went home the same way I arrived and I could definitely feel the difference compared to my revolved OE Bilstein/Eibach setup. Ride is a hell of a lot smoother yet firm at the same time, less body roll, massive, massive improvement. . Ray set them up 3-4 clicks above fully soft, and about 10mm lower FRT/Back then the Bilstein/eibach setup (need to update avatar with pic of front with new ride height).

Big shout out to Justin who sold them to me for a good price and for spending most of the today with me in the waiting room... Also Big shout out to Owen for hooking me up with Race Line for the installation. They did a fantastic job with the install but forgot to put the height adjustment spanners back in the box with the old shocks ...

Another Happy Shockworks Coilover customer. Can't wait to go for a spirited drive.

Hey brother g, Can't wait to drive the car with the new setup! I'm confident the driving experience will be awesome!

and yes big thanks to Brother Owen and race line team

3rspecb wrote:Had shockworks coilovers installed today by Race Line Motorsports in Nunawading..

I was just there today getting Shockworks installed! Yet to go for a real drive on them, but damn do they have some nice cars in there