Page 1 of 1

Spring rate for BC BR Coilovers

PostPosted: Thu May 01, 2014 2:49 am
by aeroudian
I put a set of BC BR Coilvers 3 months ago~
springs are 6kg front & 8kg rear~
after doing some testing, i feel its also too soft~
just exchanged them last month (8kg front & 6kg rear for now)
but still not hard enough~

now i'm thing to buy some new springs
car is major in hillclimb & track
anyone has some spring rate recommondations??
thx~

Re: Spring rate for BC BR Coilovers

PostPosted: Thu May 01, 2014 9:22 am
by jslayz
Have you done sway bars also?

I have 7kg F and 9kg R and like that setup for very spirited driving.

Good swaybars are a must upgrade, Heavy Duty mounts and rear sway only if keeping to a budget.

J

Re: Spring rate for BC BR Coilovers

PostPosted: Thu May 01, 2014 3:45 pm
by aeroudian
jslayz wrote:Have you done sway bars also?

I have 7kg F and 9kg R and like that setup for very spirited driving.

Good swaybars are a must upgrade, Heavy Duty mounts and rear sway only if keeping to a budget.

J


Thx for replying~
already have front & rear sway bars from whiteline~ thinking buy a set of HD mount