Page 1 of 1

XYZ coilovers

PostPosted: Tue Aug 13, 2013 1:45 pm
by meownerator
Hey guys,
Just wondering if anyone has any experience with XYZ brand coilovers?
Got a quote for 1700 install, which might push me into doing it rather than just springs...

http://wasuspensions.com.au/news/2011/0 ... over-kits/

cheers

Re: XYZ coilovers

PostPosted: Tue Aug 13, 2013 1:52 pm
by alessandro132
Paggaz is running these at the moment, hopefully he can weigh in on his experience with these.

Re: XYZ coilovers

PostPosted: Tue Aug 13, 2013 5:56 pm
by paggaz
I sure am running XYZ coilies :)

Just for your reference, Performance Suspension offer a new set-up for the Gen 4 for $1295 delivered. Their website is http://www.performancesuspension.com.au
Email Chris (Managing Director) at Performance Suspension in the Gold Coast if you're interested in that deal.

I bought my set of XYZs second hand with around 15k kms on them and since have put another 5k on them. Currently no leaks, faults or damage.

When I first installed them, I left them at the same height, spring pre-load and dampening settings as the previous owner (had on an Outback), and there was about 5cm wheel gap all around (and it could still go slightlyhigher). I lowered it down so the guards were in line with the top of tyre. At my current height, it's lower than the lowest setting which you can get from KiDo coilovers (and possibly other brands) and there's still approx 45mm lower, if you want it slammed.

It also felt much much smoother than the stock Bilstein + Tein S-Tech suspension combo which I used to run. It was only then I realised that they had a 30 way adjustable dampening (which was set to soft-ish) and I tightened it right up to about 5 clicks from hardest. I don't mind the stiff ride and it handles beautifully.

Also, as far as I know, they're rebuildable too.

Re: XYZ coilovers

PostPosted: Tue Aug 13, 2013 6:22 pm
by meownerator
Thank you most kindly sir!
They certainly sound exactly like the right upgrade path for my budget.