18x10 +25
Posted:
Mon Jun 10, 2013 7:51 pmby seanography
will 18x10 +25 fit on a 2008 liberty if the guards are rolled and pulled?
Cheers,
Sean
Re: 18x10 +25
Posted:
Mon Jun 10, 2013 7:59 pmby zch91
Maybe if you run like 8-10 degrees of camber?
A rough calculation tells me they will poke around 60-70mm more than your stock wheels.
Re: 18x10 +25
Posted:
Mon Jun 10, 2013 8:01 pmby jakey
You would definitely need to pull the guards..
Have you got a picture of said wheels?
Here is an example on a rex
http://forums.nasioc.com/forums/showpos ... ostcount=5
Re: 18x10 +25
Posted:
Mon Jun 10, 2013 8:28 pmby seanography
the wheels are xxr 521s.
DAMN 8-10 degrees of camber?!?!
- 3831_10151258817126833_1375444301_n.jpg (62.74 KiB) Viewed 1776 times
Re: 18x10 +25
Posted:
Mon Jun 10, 2013 8:29 pmby seanography
Caution wrote:
is that the same specs? looks flush!
Re: 18x10 +25
Posted:
Mon Jun 10, 2013 8:32 pmby zch91
You will need to run a decent whack of camber, I can't tell you exactly what but it'd be 5 degrees +
That with rolled/flared/pulled guards and a crapload of stretch (probably 215/225's on the 10') and it might fit up ok, and still rub to buggery