Quick fitment question

[Statts]

My new wheels turned up on Friday and go off to the powder coaters tomorrow. Wheels are 18x8.5 +44. Suspension is lowered on stock Bilsteins. Couple of questions:

* Will I need my guards rolled?
* Will 235/40 18's fit with stock suspension? Guard rolling?

[lib08gt]

.

[Statts]

Thanks for that. Was hoping it was the case.

I'm keen on 235/40 as it is closer to the overall diameter of the stock tyre than the 225/40 is. Also, it's a Commodore tyre size so range and prices are great.

[ferret89]

My understanding is that there will be some slight rubbing with 235 tyres without guardwork.

[bates91]

get guards rolled to be on the safe side

[Statts]

Thanks guys. 235 and a roll it is.

[jacks-GTB]

Ay chris

I'm currently running blisteins with king lows....I know crappy

But I have rota 18x8.5 with kumho ku31 235/40/18, not guard rolling....never rubbed even with a fully load car

[jslayz]

Ay chris

I'm currently running blisteins with king lows....I know crappy

But I have rota 18x8.5 with kumho ku31 235/40/18, not guard rolling....never rubbed even with a fully load car

rears will rub a little with 235/40/18 with loaded car and bumps at speed.

[Statts]

Ay chris

I'm currently running blisteins with king lows....I know crappy

But I have rota 18x8.5 with kumho ku31 235/40/18, not guard rolling....never rubbed even with a fully load car

Thanks for the reply Jackson. EXACTLY the info I was after.

[Statts]

Ay chris

I'm currently running blisteins with king lows....I know crappy

But I have rota 18x8.5 with kumho ku31 235/40/18, not guard rolling....never rubbed even with a fully load car

rears will rub a little with 235/40/18 with loaded car and bumps at speed.

Conflicting reports there. I think I will just see how I go. Get the rears rolled only if need be.

[t.renshaw34]

Im 245/40/18. 35-40mm lower than stock. Guards rolled and pumped 2-5mm. No scrubbing.