club.liberty.asn.au

So this is semi going to be a question/semi going to be a rant.

Where can i actually buy the plain, aus made standard rotors to suit a GT that a few people on here speak about? That are cheaper than the slotted ones we dont really need for daily driving. Ive now inquired at two RDA stockists and 2 DBA stockists.

RDA apparantly has nothing in the country for our cars till the 28th of september and there will be a 6-8 week wait from there to get either slotted or gold ones and want to charge $260 for plain ones, $295 for slotted and $345 for gold. (pairs)

DBA is apparantly about to do some big order, has no stock of plain ones, only slotteds and wants to charge $390 for slotted (t2's) and $630 for "2650x" which i assume are the cross drilled ones.

These were supercheap and repco stores etc.

I had decided i didnt really need slotted ones and proceeded to try and find plain ones but no.... cant even get them.

So where do y'all get them from?

Otherwise ill be getting dixcel's from PHAT.

Cruisn is probably the best person to ask.

Www.brakesdirect.com.au

I just got a quote of from them:
Front and rear DBA T3 4000 series rotors to suit 08 Liberty GT

Fronts $206.25 ea Inc
Rears $198 ea Inc

I'm thinking of doing fronts only.

I'm not paying that much for a flat chunk of steel.

stew07gt wrote:I'm not paying that much for a flat chunk of steel.

So just PM Cruisn...

For RDA rotors, Get in touch with Trav at Street Sprint on Facebook or some of the other forums (Username HiPsi)

chaotic2050 wrote:

stew07gt wrote:I'm not paying that much for a flat chunk of steel.

So just PM Cruisn...

This ^

Hey mate,
Shoot Dan @ ART an email, tell him Serge from club.lib sent you... he should be able to help out.
http://www.artperformanceparts.com/contact.html
Very happy with the dba t2 street slotted fronts and intima SS pads I got off him a while back..
Serge

Aren't they both brand made in Oz..... why the wait???

apparantly ... "they have none in the country"... well thats what RDA stockists told me. makes you wonder...

stew07gt wrote:apparantly ... "they have none in the country"... well thats what RDA stockists told me. makes you wonder...

have you tried Garage 88.... you might spend a little more on Dixcels, but at lest your getting a much better product with a matching pad to suit.

This is my next option, and since ill soon be going down to pick cusco sways and mounts, i think ill get rotors while im there to if nothing good good turns up soon.

sorry to post a question on your thread but can you guys tell me what specs or dimensions rotors i need for brembos??
and anything special i should know...

and if possible could i grab some part #s??

as i already have brembos with the adapter etc to go on a post facelift and i already have the front rotors just wanting to check that it will all fit etc



thanks heaps!!

Rears are DBA2657 to suit the Liberty handbrake.

Add 4 in front if you want 4000 series and S at the end if you want slotted.

Front rotors will fit as long as theyre 5 x 100 and not '05 on 5 x 114.3 pcd.

cruisn wrote:Rears are DBA2657 to suit the Liberty handbrake.

Add 4 in front if you want 4000 series and S at the end if you want slotted.

Front rotors will fit as long as theyre 5 x 100 and not '05 on 5 x 114.3 pcd.

without putting the front rotors on the car itself how can i check the 5x100??

and i dont think the fronts are the 4000 series, on the box it just says street series??


EDIT
i can confirm they are NOT 4000s and they are REARS!!! with that same part # stated above...
**** i feel like a complete **** but i guess thats what i get for not looking lol

but now where can i find the part# for the fronts
thanks guys and sorry lol