club.liberty.asn.au

G'day guys,
I am just not happy with rear shockers, the rear isn't firm as fronts are, I've always liked firm "road feel" suspensions, each time I go over a bump it feels like there is no "gas" in the struts, but the suspension has passed it tests about 2 months ago - still not happy with it.
I'm not asking on lowering it - just can't do it due steep driveway as front & almost scrapes by 10mm - and you'll scrape if you're going too fast!! I'm lending towards on having Bilstiens rears but downside is it does lower it than standard Gen 4 2.5i shockers and the fronts will stick up.
So what I am asking here - What have you done with yours?
Thanks
Cheers
AP

Get the billies and some saggy bum spacers from paranoid fabrications I got some last month for my wife's car as I put gt sedan springs in and it dropped the rear about 2 inch so I bought some 1 inch spacer and live with the difference.

Get the billies in the rear, fit, measure the height difference and I'll make you some spacers for nothing to suit.