Page 1 of 1
Whitelin roll centre adjust kit: KCA313
Posted:
Tue Dec 04, 2007 1:06 pmby tangcla
Has anyone had any experience with this part?
KCA313 - Roll centre adjust kit - is designed to raise front roll-centre geometry by using new special ball-joints, while maintaining original bump-steer by using new tie-rod ends.
Changing front suspension geometry by raising roll-centre, results in substantial increase to roll resistance and significant reduction of suspension compressio nof outside front wheel during cornering through improved weight transfer distribution.
During cornering, this leads to signficantly reduced understeer through reduced front wheel compression, as well as improved steering feel and precision and vehicle stability.
Contents:
2x ball-joints with dust boots, nuts and split-pins
2x tie-rod ends with dust boots, nuts and split-pins.
Posted:
Tue Dec 04, 2007 1:42 pmby Akwoo
think i saw some posts on legacygt.com
i know mick is suppose to be testing out the zerosports one, don't think he has fitted it yet.
theres also HKS kansai one available too.
Posted:
Tue Dec 04, 2007 1:57 pmby tangcla
So what's the verdict?
Worth getting? Will it increase NVH?
Posted:
Tue Dec 04, 2007 4:02 pmby Akwoo
if u lower your car.
i thought u were keeping it at 4wd heights.
Posted:
Tue Dec 04, 2007 4:22 pmby tangcla
icandy wrote:if u lower your car.
i thought u were keeping it at 4wd heights.
You know I already have springs... and you know I'm getting a set of coilovers...
Posted:
Thu Dec 06, 2007 12:17 amby suff
What springs do you have at the moment Tangcla?
Posted:
Thu Dec 06, 2007 6:33 amby tangcla
suff wrote:What springs do you have at the moment Tangcla?
I've got a set of kg-mm springs from Japan, which are for sale.
Posted:
Fri Dec 07, 2007 9:51 amby norbs
I have these installed and they are great. I lowered my car about 1 year ago and only recently gave these a thought. You will particularly notice on hard cornering. Car sits flatter and I can push it harder.
If you've lowered your car, this is a no brainer. google roll center and you will see.
Posted:
Fri Dec 07, 2007 9:55 amby tangcla
norbs wrote:If you've lowered your car, this is a no brainer. google roll center and you will see.
Googling now...
Posted:
Fri Dec 07, 2007 11:22 amby BlackGT
Got this on my car now
It does improve turn in a little..though I'm still rollin on stock suspension
. Since I got a young daughter and another baby on the way I can't justify the harsher ride of stiffer or lowered springs.
Posted:
Fri Dec 07, 2007 11:23 amby BlackGT
suff wrote:What springs do you have at the moment Tangcla?
How does a manual GT compare to an auto?
Posted:
Wed Dec 12, 2007 8:53 amby suff
How do you mean BlackGT? Performance or handling or both?
Posted:
Wed Dec 12, 2007 8:57 amby tangcla
I'm guessing performance. Handling should be the same, right?
Posted:
Thu Jan 10, 2008 7:53 pmby tangcla
Pics of the rollcenter bushing.
