club.liberty.asn.au

I'm looking at getting Advanti Almera's not sure would be better 18" or 19"??

Offset +45 if I opted for 19's would I need any modifications? i.e rolling guards?

climic wrote:I'm looking at getting Advanti Almera's not sure would be better 18" or 19"??

Offset +45 if I opted for 19's would I need any modifications? i.e rolling guards?

If it's a 19" x 8.5" with a +45 offset, with a 225 tyre you will only need the gaurds rolled.

Cheers,
Rusty.

04GTLIB wrote:

climic wrote:I'm looking at getting Advanti Almera's not sure would be better 18" or 19"??

Offset +45 if I opted for 19's would I need any modifications? i.e rolling guards?

If it's a 19" x 8.5" with a +45 offset, with a 225 tyre you will only need the gaurds rolled.

Cheers,
Rusty.

Ahh ok what if its a 235 tyre? Or should I go 225?

And how do I go about rolling my guards if so? Will I need to roll rear + front?

Thanks!

climic wrote:

04GTLIB wrote:

climic wrote:I'm looking at getting Advanti Almera's not sure would be better 18" or 19"??

Offset +45 if I opted for 19's would I need any modifications? i.e rolling guards?

If it's a 19" x 8.5" with a +45 offset, with a 225 tyre you will only need the gaurds rolled.

Cheers,
Rusty.

Ahh ok what if its a 235 tyre? Or should I go 225?

And how do I go about rolling my guards if so? Will I need to roll rear + front?

Thanks!

Brendon.
I think it comes down to how wide the rim is.
If it's an 8.5" rim then a 235 tyre will be pushing it so to speak, but a 225 will fit fine with the both front and rear guards rolled.
There's plenty of guys around that roll guards and they will more than likely do it at your house, so check your local listings for guard rolling and give them a call.
The guys your buying the wheels off may even have someone that does guard rolling for them.
Hope this helps.
Cheers,
Rusty.

Brendon.
I think it comes down to how wide the rim is.
If it's an 8.5" rim then a 235 tyre will be pushing it so to speak, but a 225 will fit fine with the both front and rear guards rolled.
There's plenty of guys around that roll guards and they will more than likely do it at your house, so check your local listings for guard rolling and give them a call.
The guys your buying the wheels off may even have someone that does guard rolling for them.
Hope this helps.
Cheers,
Rusty.

Yeah just found out they are both 18x8 and 19x8

So i should be clear of anything hey?

Thanks

Don't Worry now.! Cant get 19's anymore in subaru fitment! So i'll have to opt for 18's!

Hey man if your still keen on 19s in the almera shape i would suggest having a look a tenzo cuzco. these are the rim im getting and im pretty sure you can get the 19s in a subaru stud pattern. Hope this helps

LiamVJ wrote:Hey man if your still keen on 19s in the almera shape i would suggest having a look a tenzo cuzco. these are the rim im getting and im pretty sure you can get the 19s in a subaru stud pattern. Hope this helps

Yeah nahh I've looked at them! They have two pcd patterns and I think the advanti would look cleaner with just the one pcd fitment! And the tenzo come in 19x8.5 so yeah weary of that one!

Thanks anyways!

climic wrote:

LiamVJ wrote:Hey man if your still keen on 19s in the almera shape i would suggest having a look a tenzo cuzco. these are the rim im getting and im pretty sure you can get the 19s in a subaru stud pattern. Hope this helps

Yeah nahh I've looked at them! They have two pcd patterns and I think the advanti would look cleaner with just the one pcd fitment! And the tenzo come in 19x8.5 so yeah weary of that one!

Thanks anyways!

Each to their own i personally think the two pcd fitments looks mean. keen to see what your almeras look like though!