club.liberty.asn.au

Hi All,

Can someone please tell me if they know of any trouble I might encounter putting these babies in http://justjap.com/store/product.php?pr ... at=&page=1
also how hard or easy is it to fit them cause otherwise im going to have to pay 500 for a mechanic to install them. Thanks for your up coming help

The ones you linked are BC V1's, which are average.
BC BR's are better for a couple hundred extra off JustJap (http://justjap.com/store/product.php?productid=19318&cat=270&page=10).
Or for basically the same price as the V1's from JustJap get them from Street to Track (http://www.streettotrack.com/coiloversbcracing.htm).

Easy to fit - probably need a breaker bar for the lower rear strut nut as they like to be PITA.
You'll need a 19mm spanner and socket, a socket wrench and/or a breaker bar, 10mm, 12mm and 14mm sockets.
If you could be bothered to mark the front camber bolt (the top one), do that, or take a picture - doesn't really matter thou cous you'll need an alignment afterwards.
Put them all in, go for a drive round the block, then measure the tyre to guard clearance on all 4 corners and write them down, then adjust them up/down.
Go for another drive and re-check the height.
They settle very slightly over the next month or so.

To set the dampening, you need to wind them full hard first (clockwise) then down however many clicks - start in the middle and play around from there, but you alsways have to wind them full hard first.

Hi Luke,

Thanks for all your detailed info and also the links and it looks like the BC BR Type RA Series Coilovers are the ones to go for
and I will put up some pics in the next few weeks of the finished result : )

Hi all,

I got the BC BR Coilovers and they arrived last week and I am having them installed on Monday so hopefully
my car will have some stance and I will post pics up when they are in Merry Christmas all

make sure after there installed they do a wheel alliment front and back prob why it costing u so much easy install but

Hi All,

Sorry for the delay in posting pics up, but life has been hectic!
Let me know what you think of the pics and car and it has dropped
2 inchs and I'm going to drop it another one

Looks good.

Just needs some wide, hectic offset wheels with stretched tyres to justify the stance works sticker.

dont go an inch lower, maybe like an extra 10mm lower, then just get fatter rims and stretch something decent and black over them.

Thanks guys, i want to get some 18x8.75 XXR 527 rims but im not 100% sure yet and im saving for a house so that limits me a bit