Pads for 04 Gt.

[t.renshaw34]

Hey guys.
So the time has come to get new brake pads.
This is my first time replacing the pads in my lib as I have only had it 8,000 kms.
I also have a set of DBA 4000's to go on the front when I get my pads changed.

Any suggestions on what pads to get? Prices and where I can get them would be great to.

Cheers
Taylor

[AndrewCowley]

Dixcel M or Hawk Ceramic.

[teK--]

Remsa Master HPT line. About 250 for a full set. High temp low dust about .45cf.

[t.renshaw34]

did a litle surfing on the "Remsa Master HPT's"
i like the sound of them...
any ideas (sites, people) who i can get them from?
all the sites i looked at just gave me info on them not prices or places to buy from.

[teK--]

GSL rally sports in Queensland. Speak to Greg.

[cruisn]

Hawk Peformance Ceramic fitted to my Gen2 GT (it had Gen4 GT brakes on it). Did a few track days with those and they held up really well.

Pretty cheap also.

[Q]

GSL rally sports in Queensland. Speak to Greg.

X2
and ask about the A1RM, great pad. Or has the Remsa taken its place?

[teK--]

GSL rally sports in Queensland. Speak to Greg.

X2
and ask about the A1RM, great pad. Or has the Remsa taken its place?

GSL are phasing them out with Remsa. I was stoked with A1RM they took a beating under all conditions and never smoked.

The Remsa are very well finished (Euro OEM) and I found them less dust than the A1RM but similar cf and temp rating.

[smythie]

Hawk Peformance Ceramic fitted to my Gen2 GT (it had Gen4 GT brakes on it). Did a few track days with those and they held up really well.

Pretty cheap also.

For a daily driver the HPC's on mine have done a fantastic job. Somewhere between 60 and 70 thousand kays on them. Will have to get a measurement on them on Thursday but even if they're done they've lasted almost twice as long as I expected. Top pads.