hey guys i got a set of billies at the moment that i haven't put in yet, and i still have my old f**** up coilovers, which had the adjustable camber top mount, i was wondering is it possible for me to switch them over to the billies so i can get adjustable camber on them?
Cheers, Tommy
Australian Liberty Owners Club
Top strut mounts, are they interchangeable?
4 posts
• Page 1 of 1
Top strut mounts, are they interchangeable?
by tkboi » Mon Jul 25, 2011 6:16 pm
MY08 Liberty Obsidian Black Sedan 2.5i AT Limited Edition SAT NAV / 6000k HID, LED INTERIOR lights, LED Parkers, 8000k HID foggies, LED BRAKE lights, LED REVERSE lights/ ULTREX front grill and front lip / K2-GEAR Rear Window Spoiler / Alpine Type S speakers (front splits, rear coaxial), Digital Design 12inch sub, 5chan JL XD700/5, Dynamat Extreme (doors and boot lid) / Blitz pod filter + self made stainless steel intake piping / STI Quads, 2.25 stainless steel, TWE 4-1 headers / front and rear whiteline swaybars / JDM weathershields / Advan RS 18x8.5 +47 / front cusco brake stopper and rear strut brace / Upgraded GT brakes / JDM Camber Adjustable Bilsteins struts with eibach springs / PHAT lower control arm bushes / front HD swaybar links / Rear HD Cusco Swaybar Mount / Perrin Lightweight crank pulley / KIDO E85/98 fuel flex tune / Upgraded GT brakes, Pads - fronts - Ferodo DS2500 rears - Remsa HPT
-
tkboi - Posts: 496
- Joined: Sat Mar 14, 2009 6:52 pm
- Location: Adelaide, SA
- Car: MY08 AT 2.5i Sedan
- Real name: Tommy
Re: Top strut mounts, are they interchangeable?
by cruisn » Mon Jul 25, 2011 6:19 pm
The top hat on the coilovers will be vastly different to the top hat on the Billies as the springs are different so Id say no without looking at them.
-
cruisn - Posts: 6560
- Joined: Tue Nov 03, 2009 8:09 pm
- Location: Melbourne
- Car: MY02 GTB E Tune
- Real name: Mark
Re: Top strut mounts, are they interchangeable?
by drndrn » Mon Jul 25, 2011 6:22 pm
The camber tops won't be interchangeable. As far as I know the only coilovers for the libs that have interchangeable top hats are the KW V2's. Well actually they use the stock top hats instead of camber tops.
If you want camber plates, try this
http://www.gtworx.com/index.php/catalog ... -sti-2008/
Not sure if that price is for a pair or each though.
Cusco also make some, but I was recently quoted $680USD delievered from the states which was a bit expensive for my tastes, I'm sure PHAT could do a better price though.
If you want camber plates, try this
http://www.gtworx.com/index.php/catalog ... -sti-2008/
Not sure if that price is for a pair or each though.
Cusco also make some, but I was recently quoted $680USD delievered from the states which was a bit expensive for my tastes, I'm sure PHAT could do a better price though.
Diamond Grey 2.5i Heritage
-
drndrn - -stickered-
- Posts: 1498
- Joined: Thu Mar 20, 2008 2:15 pm
- Location: Glen Waverley, Victoria
- Car: MY08 Subaru Liberty
Re: Top strut mounts, are they interchangeable?
by tkboi » Mon Jul 25, 2011 6:31 pm
naww damn thanks for the quick replies guys, yea i will have a look into those camber plates then, if thats 380 for both then thats pretty decent.
MY08 Liberty Obsidian Black Sedan 2.5i AT Limited Edition SAT NAV / 6000k HID, LED INTERIOR lights, LED Parkers, 8000k HID foggies, LED BRAKE lights, LED REVERSE lights/ ULTREX front grill and front lip / K2-GEAR Rear Window Spoiler / Alpine Type S speakers (front splits, rear coaxial), Digital Design 12inch sub, 5chan JL XD700/5, Dynamat Extreme (doors and boot lid) / Blitz pod filter + self made stainless steel intake piping / STI Quads, 2.25 stainless steel, TWE 4-1 headers / front and rear whiteline swaybars / JDM weathershields / Advan RS 18x8.5 +47 / front cusco brake stopper and rear strut brace / Upgraded GT brakes / JDM Camber Adjustable Bilsteins struts with eibach springs / PHAT lower control arm bushes / front HD swaybar links / Rear HD Cusco Swaybar Mount / Perrin Lightweight crank pulley / KIDO E85/98 fuel flex tune / Upgraded GT brakes, Pads - fronts - Ferodo DS2500 rears - Remsa HPT
-
tkboi - Posts: 496
- Joined: Sat Mar 14, 2009 6:52 pm
- Location: Adelaide, SA
- Car: MY08 AT 2.5i Sedan
- Real name: Tommy
4 posts
• Page 1 of 1
Return to Suspension, Brakes, Wheels and Tyres.
Who is online
Users browsing this forum: No registered users and 7 guests