Low Lib's

by **AB501UT!0N** » Mon Mar 19, 2012 11:48 am

Azzo28 wrote:Once I get them fitted I'll post some pics up. Hopefully early next week they'll be on. Thanks for your help.

Sounds good to me and your welcome, anything for a Heritage owner

And I shall be waiting for the pics

by **Jack_Keaka** » Mon Mar 19, 2012 12:25 pm

Chris, did you ever end up lowering yours even lower??

by **AB501UT!0N** » Tue Mar 20, 2012 11:55 am

Jack_Keaka wrote:Chris, did you ever end up lowering yours even lower??

I certainly did Jack, I shall takes some pics soon and its kinda as low as the front is going to go

And Im going to get a lip for it soon to make it look even lower but I have not decided on one yet, any ideas guys?

by **sheppo9** » Tue Mar 20, 2012 1:17 pm

AB501UT!0N wrote:I certainly did Jack, I shall takes some pics soon and its kinda as low as the front is going to go

And how low is that? 5mm from the CV boots?

As for the front lip, either get a cheap EZLip or an Ultrex type MY06 WRX one and cut the ends to the Liberty length.

by **cruisn** » Tue Mar 20, 2012 2:45 pm

I cant believe you havent thrown up a pic of your car Luke to show them what low really is........ :twisted:

by **Jack_Keaka** » Tue Mar 20, 2012 5:39 pm

cruisn wrote:I cant believe you havent thrown up a pic of your car Luke to show them what low really is........

http://forum.liberty.asn.au/viewtopic.php?f=10&t=7411

by **cruisn** » Tue Mar 20, 2012 5:42 pm

Jack_Keaka wrote:
cruisn wrote:I cant believe you havent thrown up a pic of your car Luke to show them what low really is........

http://forum.liberty.asn.au/viewtopic.php?f=10&t=7411

Nope, wrong Outback. :wink:

That one looks like a 4WD in comparison.

by **Jack_Keaka** » Tue Mar 20, 2012 5:53 pm

??????????

by **AB501UT!0N** » Sun Apr 01, 2012 10:31 pm

Hey luke, i shall post up some pics this week once I pull my finger out and can you post up a pic of your car please?

Also I am going for an ezylip for starters and I will see how much I scrap that on stuff before I get the ultrex one
and I'm getting some custom plates tonight and also some new wheels next week. Question for u luke
how wide do u reckon I can go with my wheel choice before I need to roll my guards?

by **sheppo9** » Mon Apr 02, 2012 3:47 pm

cruisn wrote:I cant believe you havent thrown up a pic of your car Luke to show them what low really is........

I could, but they could always go looking for them too.
Which translates to - I couldn't be bothered finding the thread (I didn't start it, so makes it abit harder), finding the pictures them linking them here.

Jack_Keaka wrote:??????????

That was a fair while ago now, it looks average at best in that picture.
But it's probably still about that low - just with bigger, wider, *brighter* wheels.

AB501UT!0N wrote:how wide do u reckon I can go with my wheel choice before I need to roll my guards?

It's about width, offset and tyre choice.
Years and years ago, I had 18 x 7.5" +45 with 225/45/18 tyres and it rubbed and the car was just on Bilsteins with "low" springs.
45 is a tall profile thou, a 40 series wouldn't of rubbed.

Basically any wider than 7.5", any lower offset than +45 will probably need "work" to fit.

by **AB501UT!0N** » Tue Apr 10, 2012 9:44 pm

Hi guys,

Sorry for the delay, I have been super busy with work and being sick so hopefully this week I shall have pics for u

Also I want to get Enkei rpf1s 17x8 or 18x7.5 or 18x8 but I cant find anywhere that will roll my guards for me

http://www.enkei.com/rpf1.html

Does anyone know of someone who can help me out so I can get these babies to fit?

Thanks everyone for your help thus far and thanks Luke for the tyre info

by **Jack_Keaka** » Tue Apr 10, 2012 10:45 pm

AB501UT!0N wrote:Hi guys,

Sorry for the delay, I have been super busy with work and being sick so hopefully this week I shall have pics for u

Also I want to get Enkei rpf1s 17x8 or 18x7.5 or 18x8 but I cant find anywhere that will roll my guards for me

http://www.enkei.com/rpf1.html

Does anyone know of someone who can help me out so I can get these babies to fit?
Thanks everyone for your help thus far and thanks Luke for the tyre info

wow i was seriously considering the exact same wheels for my lib! even photoshopped them on to see what they would look like! haha
you could buy a guard roller yourself?

by **sheppo9** » Fri Apr 13, 2012 9:28 am

Jack_Keaka wrote:you could buy a guard roller yourself?

I did. Mark did.
It's what all the cool kids (kids, pffft) are doing these days.

by **AB501UT!0N** » Wed Apr 18, 2012 10:10 pm

sheppo9 wrote:
Jack_Keaka wrote:you could buy a guard roller yourself?

I did. Mark did.
It's what all the cool kids (kids, pffft) are doing these days.

Haha cool kids hey

Im sorry again guys for the delay, my custom plates are almost on order after abit of a crazy week/weekend
and I have one last quick question regarding my rims, im looking at getting 18x8 with a offset of 35 or 18x7.5 with an offset of 48?
Please help guys thanks

http://enkei.com/Enkei_Wheels_2012_Catalog.pdf

by **cruisn** » Wed Apr 18, 2012 10:14 pm

Personally Id go the 18x 7.5 +48, but the "illest" kids would go 18 x 8 +35.

Do you have coilovers? You'll need them in the front to get enough negative camber to clear the 8" +35 rims.

Low Lib's

Re: Low Lib's

Re: Low Lib's

Re: Low Lib's

Re: Low Lib's

Re: Low Lib's

Re: Low Lib's

Re: Low Lib's

Re: Low Lib's

Re: Low Lib's

Re: Low Lib's

Re: Low Lib's

Re: Low Lib's

Re: Low Lib's

Re: Low Lib's

Re: Low Lib's

Who is online