Re: 235/40/18 fitment, rolled lip/camber?
![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
I run 235/40/18 with 50 offset on a stock b spec with pretty conservative (read standard) alignment settings. Not had a single issue. Having said that there is probably only about 3 more mm to spare before i might have to consider some counter measures.
if you are going 44 offset (6mm more than mine) then yes you may have some issues, but having said that, i is only going to be a small amount that you will need to gain. If you can get 3-4mm extr clearance from some careful guard pulling, should be sweet as.
Cheers
if you are going 44 offset (6mm more than mine) then yes you may have some issues, but having said that, i is only going to be a small amount that you will need to gain. If you can get 3-4mm extr clearance from some careful guard pulling, should be sweet as.
Cheers