Springs, shock absorbers, swaybars,
Brakes, Wheels and Tyres
by Russelll » Tue Jan 10, 2017 4:49 pm
Having issues with tyre scrubbing on the inside edge of both front and rear tyres. I have had wheel alignment done with pins to correct alignment. Is there something else to look at as tyres are still wearing on the inside. Thanks in advance
-
Russelll
-
- Posts: 2
- Joined: Tue Jan 10, 2017 4:43 pm
- Car: 2013 Subaru Liberty 3.6
by BillyCorgi » Tue Jan 10, 2017 5:00 pm
There is no adjustement for camber on the rear of a Gen5
Factory camber should be -1 degree with 18 inch wheels
This is what the Fcatory Service Manula says regarding adjustment
NOTE:
• Front and rear toe-in and front camber can be
adjusted. Adjust if the toe-in or camber tolerance
exceeds specifications.
• For other items indicated in the specifications table,
there is no adjustment mechanism. If other
items exceed specifications, check the suspension
parts and connections for deformation, and replace
the parts if defective.
-
BillyCorgi
-
- Posts: 1809
- Joined: Tue Aug 20, 2013 10:11 pm
- Location: Bankstown Area, Sydney
- Car: Liberty 3.0R-B Wagon E85 Flex Fuel
- Real name: Peter
- Profile URL: www.facebook.com/CorgiWerx
by Russelll » Tue Jan 10, 2017 5:06 pm
The camber is greater than 1deg. It is visible to the naked eye. Can someone suggest a good location to have this seen to in the Caboolture/North Brisbane area.
thanks
-
Russelll
-
- Posts: 2
- Joined: Tue Jan 10, 2017 4:43 pm
- Car: 2013 Subaru Liberty 3.6
Return to Suspension, Brakes, Wheels and Tyres.
Who is online
Users browsing this forum: No registered users and 3 guests