VanillaIce220 wrote:Hello, So I will be upgrading to some Brembo brake calipers front and back but i wanted to check if they will fit the rims i currently have. At the moment I have Enkei GTC01 17inch 7.5 wide and offset is 48.... I do not think they will fit but I am not an expert which is why i am here , I also saw the first thread on this index topic and saw that 18inch offest 45 did not clear brembo brakes soo it is not looking good.
secondly if they do not fit my current rims, will brembo brakes clear these rims. They are Proworks 18inch 7.5 wide, offset 48
http://www.gumtree.com.au/s-ad/mount-gr ... 1076539546
and lastly I was told to fit rear brakes (brembo) i need a connector thing i forget the name, so if someone could send a link my way to buy them i would really appreciate it.
Thank you
alexeiwoody wrote:VanillaIce220 wrote:Hello, So I will be upgrading to some Brembo brake calipers front and back but i wanted to check if they will fit the rims i currently have. At the moment I have Enkei GTC01 17inch 7.5 wide and offset is 48.... I do not think they will fit but I am not an expert which is why i am here , I also saw the first thread on this index topic and saw that 18inch offest 45 did not clear brembo brakes soo it is not looking good.
secondly if they do not fit my current rims, will brembo brakes clear these rims. They are Proworks 18inch 7.5 wide, offset 48
http://www.gumtree.com.au/s-ad/mount-gr ... 1076539546
and lastly I was told to fit rear brakes (brembo) i need a connector thing i forget the name, so if someone could send a link my way to buy them i would really appreciate it.
Thank you
http://www.rallysportdirect.com/Kartboy ... ear-Subaru
Or
http://www.knsbrakes.com/c/kns-bracket
Just need the adapter and the right rotors on the rear
dr20t wrote:Simple rule. If you act like a dick then you deserved to get dicked
fedaykin wrote:Offset doesn't determine brake clearance, spoke design/backspace does. Your Enkei's should clear, measure how much room you have from spokes to the hub mounting surface.
BigBCalais wrote:Ta da, here is an image Hardwarebob sent me when I was looking at buying his brembos. It's a cross section of the caliper and a rotor with all the clearances
dr20t wrote:Simple rule. If you act like a dick then you deserved to get dicked
BigBCalais wrote:It's pretty confusing haha, took me a while. Big block is the caliper and the thin bent looking piece is the rotor, the left side is the front and it only shows the front half of the caliper.
So it's 35.4mm from where the disk mounts to the hub to the outside of the caliper
VanillaIce220 wrote:Okay everyone, last night I remembered there was a guy in my town who has a TBSTI with the black brembo brakes.... so I though why not pay him a visit and throw mine on.... and IT FITS!!!!! so happy, there is like a 2 or 1mm clearance from the spokes. We did spin it around and round and it did not scrub... ahh so happy. Thanks everyone for the help much appreciate it
alexeiwoody wrote:VanillaIce220 wrote:Okay everyone, last night I remembered there was a guy in my town who has a TBSTI with the black brembo brakes.... so I though why not pay him a visit and throw mine on.... and IT FITS!!!!! so happy, there is like a 2 or 1mm clearance from the spokes. We did spin it around and round and it did not scrub... ahh so happy. Thanks everyone for the help much appreciate it
Hahaha nice
It would look very smick with that clearance too!
Return to Suspension, Brakes, Wheels and Tyres.
Users browsing this forum: No registered users and 7 guests