First issue is the bushing brackets are narrower than the AVO mounting holes:
![Image](http://i32.photobucket.com/albums/d3/desperatedano/IMG_20130919_170216.jpg)
Secondly the stock mounting holes are not even close to lining up:
![Image](http://i32.photobucket.com/albums/d3/desperatedano/IMG_20130919_134658.jpg)
This picture is with the diff bracket bolt fully torqued up with car on a lift and still a good 6-7mm off, only way to make them fit it seems is to drill out the holes. I cant believe there is such a small difference between the mounting points on jdm vs usdm models, unless i got a badly made set, trying to confirm with AVO if there is more than one variant of these available and if they should actually fit the JDM models, i put on the new Whiteline bar anyway while i was at it, just need to take it easy with the stiffer bar fitted on the weak stock mounts.
Only other options i can see is the EMOTION FUKUOKA brackets, i cant see any other options online. Anyone recommend something better or hear of problems with the AVO mounts before?