OZ Racing Ultraleggera 18x8 +35

[seanmau5]

I found a set on Import Monster... Do want!!!!!

Anyone have this width and offset? I'll probably stretch 225/40 on them. I'm hoping that it will just require a guard roll.

Advice welcome!

[bosc0]

I has dis, well +38. Will need to roll rear guards and run +2 camber up front if you be low low with no rolled front guards.

[alessandro132]

Specs are perfect. Start with a roll at all four corners + neg 2 degrees of camber and see how you go. If it still scrubs then flare the guards a little and you should be sweet.

[blacktop™]

Very nice specs

Go for it!

[seanmau5]

Awesome thanks guys... I originally wanted something a bit more conservative so was looking for 8" with an offset somewhere in the 40s but I couldn't ignore these when they came up!!! Will be refurbished in gold.

[blacktop™]

Awesome thanks guys... I originally wanted something a bit more conservative so was looking for 8" with an offset somewhere in the 40s but I couldn't ignore these when they came up!!! Will be refurbished in gold.

these are hardly extreme sean, they will look really nice.

[bigBADbenny]

18 8.5 +35

[Jack_Keaka]

So you have purchased these?! Can't wait to see them!

[seanmau5]

No I placed a bid for $900 and forgot about them..... They sold to someone else for $909 fuck..

There's another set 18x8 +48 but they're $2129 without postage costs............

[GT-B Spec R Pilot]

I found a set on Import Monster... Do want!!!!!

Anyone have this width and offset? I'll probably stretch 225/40 on them. I'm hoping that it will just require a guard roll.

Advice welcome!

I have the 18*8 but with 48 offset (from memory) in matte black with 235 40 rubber which is the same rolling diameter (well 1mm less if you want to be specific) as the stock 215 45 rubber that was factory fitted. 235 40 i18 is a standard commodore size so the tyres are about a third cheaper than in 215 45.

I had no issues at all, just bolted em up after balancing, did a wheel alignment & off I went.