20'' of frustration! Help?

Springs, shock absorbers, swaybars,
Brakes, Wheels and Tyres

20'' of frustration! Help?

Postby Pyramidrocker » Tue Aug 10, 2010 7:38 pm

Hi, i just want a set of 20'' rims for my 05 GT Wagon, prefferably the K-Speed Biaggi.
Will these fit?
Do i need to roll the gaurds?
What size tires do i need to fit these bad boys with?
Will it be illegal?
Thanks in advance!!
2005 GT Liberty Wagaon, King Springs, 20'' K-Speed Biaggi's.
User avatar
Pyramidrocker
 
Posts: 61
Joined: Mon Aug 09, 2010 7:00 pm
Location: NSW South Coast
Car: 05 Liberty GT Wagon
Real name: Ben

Re: 20'' of frustration! Help?

Postby hamish_023 » Tue Aug 10, 2010 8:02 pm

No idea why you would want to put 20" on a liberty when 19's look great and big enough but whatever...

viewtopic.php?f=19&t=8107
User avatar
hamish_023
 
Posts: 3608
Joined: Mon Aug 10, 2009 8:21 pm
Location: Adelaide
Car: Black Liberty GT
Profile URL: viewtopic.php?f=10&t=10013

Re: 20'' of frustration! Help?

Postby smythie » Tue Aug 10, 2010 8:55 pm

His other two posts were in that thread you linked to Hamish.

Mr Rocker, others have gone with 20" wheels on cars originally specced with 17" wheels. You really need to check with your local department of transport (RTA, VicRoads, Queensland Transport, etc). You haven't mentioned where you are so it is a little hard for the odd industrious one in here to check things for you
Flag Bitch

MY06 3.0RB
User avatar
smythie
 
Posts: 5227
Joined: Mon Oct 27, 2008 12:46 pm
Location: Sydney (w-end)
Car: MY06 3RB - Blue

Re: 20'' of frustration! Help?

Postby hamish_023 » Tue Aug 10, 2010 8:56 pm

Ohh my bad.

From what i know in SA it's 2 sizes up (stock 17 - 19's etc) unless engineered
User avatar
hamish_023
 
Posts: 3608
Joined: Mon Aug 10, 2009 8:21 pm
Location: Adelaide
Car: Black Liberty GT
Profile URL: viewtopic.php?f=10&t=10013

Re: 20'' of frustration! Help?

Postby Pyramidrocker » Wed Aug 11, 2010 4:09 pm

Sorry, i'm in NSW.
Bassically i don't want to drive 2hrs to Tempe,fork out a wallet full of cash and buy these bad boys and get home and be deffected.
I guess it pays to do a little research first.
I've read Tempe are rubbish but, i can't get what i want down here.
2005 GT Liberty Wagaon, King Springs, 20'' K-Speed Biaggi's.
User avatar
Pyramidrocker
 
Posts: 61
Joined: Mon Aug 09, 2010 7:00 pm
Location: NSW South Coast
Car: 05 Liberty GT Wagon
Real name: Ben

Re: 20'' of frustration! Help?

Postby smythie » Wed Aug 11, 2010 5:39 pm

NSW. Cool, a quick search of the rta site on google has yielded me this pdf (right click and "Save as") which in summary gives the following guidelines for use of new wheels:

- offset cannot be reduced by more than 12.5mm on each side (that means you can't go smaller than +43mm)
- Outside diameter of wheel/tyre combination must not be more than 15mm greater than that of the tyre size with the largest OD on your tyre placard. What tyre sizes are listed on the tyre placard of your 2.0i?
- the load rating of the new tyres you are putting on the car must exceed that of the lowest rating on your tyre placard
- the speed rating of the new tyres must be higher than 140mm
- no part of the wheel/tyre combo can protrude outside the extremities of the car body

Anything outside this will require what many refer to as an engineers certificate and the run around with blue slips and what-not.

Bear in mind that the document referred to is dated November 2003 (Rev 4). I don't know if there is anything later.
Flag Bitch

MY06 3.0RB
User avatar
smythie
 
Posts: 5227
Joined: Mon Oct 27, 2008 12:46 pm
Location: Sydney (w-end)
Car: MY06 3RB - Blue

Re: 20'' of frustration! Help?

Postby Pyramidrocker » Wed Aug 11, 2010 7:54 pm

Thanks heaps! Exactly what i was after.
2005 GT Liberty Wagaon, King Springs, 20'' K-Speed Biaggi's.
User avatar
Pyramidrocker
 
Posts: 61
Joined: Mon Aug 09, 2010 7:00 pm
Location: NSW South Coast
Car: 05 Liberty GT Wagon
Real name: Ben


Return to Suspension, Brakes, Wheels and Tyres.

Who is online

Users browsing this forum: No registered users and 3 guests