Brembo Rear Disc Part #

[overl0ad]

so, can any please tell me the actual part number for the brembo rear disc?

i'm specifically after the brembo OEM rotor. can't really afford to go to 332 or 328 now.

essentially looking for some rotors to match this up with. these are 332s

[jdm rsk]

i found this number give it a try.....rear brembo rotors pcd 5x100 = 26700FE000, pcd = 5x114.3 26700FE050

link
http://opposedforces.com/parts/impreza/ ... tration_3/

[overl0ad]

thanks for the heads up, but i rememeber that the impreza and libertys use different hand brake shoe sizes.

i know one's a 170mm drum, and the other is 190mm, but i don't remember which is which.

also, i'm specifically after the 316mm rear disc...

perhaps someone can advise on doing a conversion to the impreza sized rear drum brake?

[jdm rsk]

thanks for the heads up, but i rememeber that the impreza and libertys use different hand brake shoe sizes.

i know one's a 170mm drum, and the other is 190mm, but i don't remember which is which.

also, i'm specifically after the 316mm rear disc...

perhaps someone can advise on doing a conversion to the impreza sized rear drum brake?

these are 316mm discs. all subaru's with brembos from factory run 190mm.. 170mm is for standard non brembo brakes. you will need to buy non brembo rotors. you asked for the brembo part number and that is what i found

[Kevlar GT]

Yep, DBA do the 170mm conversion/adapted handbrake in the Brembo rotor. Got the part number at home and will post later if no one beats me to the punch (shane).

[overl0ad]

Just a quick note for anyone else looking for a reference. the part number is:

DBA2657

or

DBA42657