Another Bolt-On Turbo Thread for MY07+

Posts specific to the 2.5 litre turbo engine

Another Bolt-On Turbo Thread for MY07+

Postby Jimmy S » Sat Jul 11, 2009 10:26 am

OK... Just posting this from the Perth-WRX thread:

"Hi guys,

I'm very happy to anounce 2 new Subaru turbochargers from GT Pumps

The GTPS02TM & GTPS03TM are a bolt on turbo for the MY08-09 WRX and Liberty GT with direct mount intercoolers. Prices are;

GTPS02TM - $1650
GTPS03TM - $1850

Both turbo's can be viewed here: http://www.gtpumps.com.au

Cheers
Abdus
Tenagah Motorsport "


For the record:

GTPS02TM = TD05 20G
GTPS03TM = TD06 20G

I ran a GT Pumps GTPS02 on my old 2L WRX and it was great! came on HARD at about 4k, but was still totally driveable from idle! Although with the extra 500cc in the Lib, It would be a perfect match IMO! :D
Last edited by Jimmy S on Mon Jul 13, 2009 12:45 pm, edited 1 time in total.
Current Ride: 2007 Audi RS4

http://www.ToonMyRide.com.au
User avatar
Jimmy S
 
Posts: 1339
Joined: Wed Mar 04, 2009 5:46 pm
Location: The Field of Dreams, WA
Car: Audi RS4
Real name: James / Jimmy

Re: Another Bolt-On Turbo Thread for MY07+

Postby Jimmy S » Mon Jul 13, 2009 12:44 pm

Bump.. Abdus is keen to get one of these onto a Perth Lib, so give him a call at Tenagah Motorsport (08 94080600) if you are interested in these!!

P.S - I'm looking at you Chris!! (Suff)
Current Ride: 2007 Audi RS4

http://www.ToonMyRide.com.au
User avatar
Jimmy S
 
Posts: 1339
Joined: Wed Mar 04, 2009 5:46 pm
Location: The Field of Dreams, WA
Car: Audi RS4
Real name: James / Jimmy

Re: Another Bolt-On Turbo Thread for MY07+

Postby suff » Tue Jul 14, 2009 3:25 pm

Now Jimmy.. what would make you think I am looking for a new Turbo :roll:

Will see that Dave can dig up for me, but on paper that's looks like a good little bundle
Daily : BMW E90 335i Sedan
Chasing 320RWHP ... FOUND (341RWHP) + Semi Slicks
Coming - APR FMIC, APR DP & Quaiffe Diff (finally)
User avatar
suff
 
Posts: 893
Joined: Sat Dec 01, 2007 5:19 pm
Location: Perth, WA
Car: E90 335i sedan
Real name: Chris

Re: Another Bolt-On Turbo Thread for MY07+

Postby coyote » Tue Jul 14, 2009 3:45 pm

I'd be asking if they can do a TD05 18G.

20G is just too big for a responsive street car.
Image

** Team Tony **
User avatar
coyote
 
Posts: 2207
Joined: Mon Jul 30, 2007 2:33 pm
Location: brisbane.qld.au

Re: Another Bolt-On Turbo Thread for MY07+

Postby GTSPECB STI » Tue Jul 14, 2009 3:55 pm

coyote wrote:I'd be asking if they can do a TD05 18G.

20G is just too big for a responsive street car.


yes agreed on that Coyote, my main concern is getting the max out of my stock snail in the next couple of weeks and trying to decide if I am happy with what i have or need more. As we know getting more might not actually be a good thing for my daily driver street car. The cool weather and another tune w/ TBE (tuned previously with stock centre pipe and quads) will tell me something but my butt tells me its pretty damn close to the max now.

The price looks good and I have never heard any negatives from this snail but getting the right size is the key.
MY10 Forester XTP
GTSPECB STI
-stickered-
 
Posts: 1836
Joined: Tue Jun 19, 2007 4:26 pm
Location: Perth

Re: Another Bolt-On Turbo Thread for MY07+

Postby Jimmy S » Tue Jul 14, 2009 4:36 pm

Fair comments/opinions, but I tend to disagree!

Having spent a significant amount of time in a 2L WRX with a TD05 20G plus a FMIC, I think it is the perfectly matched turbo for the 2.5T!

Especially combined with an effective TMIC, the increase in lag would not be that big.

It is after all the stock size turbo housing on the 2L Evo!?
Current Ride: 2007 Audi RS4

http://www.ToonMyRide.com.au
User avatar
Jimmy S
 
Posts: 1339
Joined: Wed Mar 04, 2009 5:46 pm
Location: The Field of Dreams, WA
Car: Audi RS4
Real name: James / Jimmy

Re: Another Bolt-On Turbo Thread for MY07+

Postby AdamW » Fri Aug 07, 2009 10:59 am

Will post some dyno runs with TD05 on 08 Lib tb STi in a few hrs, tuner is expecting about 240kW ATW with new turbo and mods.
MY08 Liberty GT-B tb STi 6MT -
With Just a Few Mods to (including but not limited to)..

Brakes - Suspension - Wheels - Intercooler - Headers - Exhaust - Dump Pipe - Turbo - CAI - Tune Etc..

Just Over 220kW ATW with more to come in a couple of weeks..
AdamW
 
Posts: 262
Joined: Thu May 08, 2008 5:47 pm
Location: Gold Coast

Re: Another Bolt-On Turbo Thread for MY07+

Postby GTSPECB STI » Fri Aug 07, 2009 11:12 am

waiting with baited breath on your results Adam as I too am getting ready to move to this snail
MY10 Forester XTP
GTSPECB STI
-stickered-
 
Posts: 1836
Joined: Tue Jun 19, 2007 4:26 pm
Location: Perth

Re: Another Bolt-On Turbo Thread for MY07+

Postby Jimmy S » Fri Aug 07, 2009 1:09 pm

I hope you did a stock run to compare? :wink:
Current Ride: 2007 Audi RS4

http://www.ToonMyRide.com.au
User avatar
Jimmy S
 
Posts: 1339
Joined: Wed Mar 04, 2009 5:46 pm
Location: The Field of Dreams, WA
Car: Audi RS4
Real name: James / Jimmy

Re: Another Bolt-On Turbo Thread for MY07+

Postby AdamW » Sat Aug 08, 2009 9:00 am

Stock as a rock - 128kW ATW
Stage 1 - EcuTek Tune - 155kW ATW
Stage 2 - TMIC, Exhaust, CAI & Retune - 180kW ATW
Stage 3 - Turbo, Fuel Pump, Fuel Pressure Regulator, GT Headers.....

A bit of a hic-up in fitting new turbo to hyperflow TMIC tho, hopefully they can get it sorted today.. I will start a new thread when all finished and will post all four dyno runs.
MY08 Liberty GT-B tb STi 6MT -
With Just a Few Mods to (including but not limited to)..

Brakes - Suspension - Wheels - Intercooler - Headers - Exhaust - Dump Pipe - Turbo - CAI - Tune Etc..

Just Over 220kW ATW with more to come in a couple of weeks..
AdamW
 
Posts: 262
Joined: Thu May 08, 2008 5:47 pm
Location: Gold Coast

Re: Another Bolt-On Turbo Thread for MY07+

Postby WhiteGTB » Sat Aug 08, 2009 9:51 am

AdamW wrote:Stock as a rock - 128kW ATW
Stage 1 - EcuTek Tune - 155kW ATW
Stage 2 - TMIC, Exhaust, CAI & Retune - 180kW ATW
Stage 3 - Turbo, Fuel Pump, Fuel Pressure Regulator, GT Headers.....

A bit of a hic-up in fitting new turbo to hyperflow TMIC tho, hopefully they can get it sorted today.. I will start a new thread when all finished and will post all four dyno runs.


Adam very interested to see your results :)

I've been investigating bolt on turbos for a little while now and this is currently sitting at the top of my list.

The S02 that is, my mate is running the S03 with forgies and damn... I like the results!

Have spoken to Mark from GT Pumps themselves, straight bolt alternative but just gotta make that final decision :) Instock off the shelf :)
User avatar
WhiteGTB
 
Posts: 3233
Joined: Sat Aug 18, 2007 2:41 am
Location: Sydney, NSW
Car: MY07 Legacy GT Spec B 6pd

Re: Another Bolt-On Turbo Thread for MY07+

Postby AdamW » Sat Aug 08, 2009 12:54 pm

A few issues with fuel system now.. Either new fuel pump or fuel pressure regulator is not doing what it is supposed to.. Seeing around 227kW ATW.. But tuner tells me that something is not right, can not get the right (enough) fuel pressure..
MY08 Liberty GT-B tb STi 6MT -
With Just a Few Mods to (including but not limited to)..

Brakes - Suspension - Wheels - Intercooler - Headers - Exhaust - Dump Pipe - Turbo - CAI - Tune Etc..

Just Over 220kW ATW with more to come in a couple of weeks..
AdamW
 
Posts: 262
Joined: Thu May 08, 2008 5:47 pm
Location: Gold Coast

Re: Another Bolt-On Turbo Thread for MY07+

Postby WhiteGTB » Sat Aug 08, 2009 6:00 pm

Adamw, what was wrong with fitting the Hyperflow TMIC?

The end tanks should bolt straigh onto the stock turbo so I'm assuming the upgrade (bolt on) should be the same?

Talking about fuel, I need to upgrade my fuel pump too... gotta call the Phat man :)

Jimmy S wrote:I ran a GT Pumps GTPS02 on my old 2L WRX and it was great! came on HARD at about 4k, but was still totally driveable from idle! Although with the extra 500cc in the Lib, It would be a perfect match IMO! :D


This is why it's my preference :)
User avatar
WhiteGTB
 
Posts: 3233
Joined: Sat Aug 18, 2007 2:41 am
Location: Sydney, NSW
Car: MY07 Legacy GT Spec B 6pd

Re: Another Bolt-On Turbo Thread for MY07+

Postby AdamW » Mon Aug 10, 2009 1:07 pm

Not sure exactly what issues they were having, something about the bolt holes not lining up exactly. I had the HyperFlow fitted a few months back with no issues at the time.. It was all sorted by Saturday morning..

I started a new thread with a bit of a description of the feel of new turbo..
MY08 Liberty GT-B tb STi 6MT -
With Just a Few Mods to (including but not limited to)..

Brakes - Suspension - Wheels - Intercooler - Headers - Exhaust - Dump Pipe - Turbo - CAI - Tune Etc..

Just Over 220kW ATW with more to come in a couple of weeks..
AdamW
 
Posts: 262
Joined: Thu May 08, 2008 5:47 pm
Location: Gold Coast

Re: Another Bolt-On Turbo Thread for MY07+

Postby GTSPECB STI » Mon Aug 10, 2009 3:49 pm

hhhmmmm thats just what I am looking to avoid...bolts not lining up!
MY10 Forester XTP
GTSPECB STI
-stickered-
 
Posts: 1836
Joined: Tue Jun 19, 2007 4:26 pm
Location: Perth

Next

Return to 2.5T engine specific

Who is online

Users browsing this forum: No registered users and 2 guests