ECU pinout for MY08 Liberty GTB 6 Speed

[TRVIING]

Hi guys,

Does anyone have the ECU pinout diagram for MY08 Liberty GTB 6 Speed? I am searching for a plug and play harness for the Haltech Elite 2500. Bloomslang Fab requires the pinout diagram to make the harness.

Appreciate for the help!

[BillyCorgi]

I have MY2008 pinout for from an USDM Legacy factory service manual.

It would be your risk whether the Japanese built 2.5 turbo is same or different.

[TRVIING]

Thanks mate. I have USDM service manuals too. I just want to make sure the ecu pinout is correct for my car.

[BillyCorgi]

Thanks mate. I have USDM service manuals too. I just want to make sure the ecu pinout is correct for my car.

Unfortunately, there are not many USDM Legacy GT Turbos gettting arround on Australian roads.

[bigBADbenny]

I’ll take a peek at the FSM link in my signature for the ADM specific manual.

Its on SLI.net:

9F18667D-A610-4765-B69E-E872CB6C4F4F.jpeg (228.12 KiB) Viewed 5063 times

Just in case your car is a tbSTi:

Its worth noting that the my08 tbSTi has a unique engine harness compared to: other postfl tbSTi and eg my08 GT.

Some part of the harness is split off the main engine bay plug, in a way thats more similar to GR STi.

I’m not sure if this consideration even affects the ecu plug, but it’s certainly imho worth mentioning.

[TRVIING]

Thanks Ben! I found ECM pin out for 07 H4DOTC in one of your FSM. I still don't know if it is AUDM ECM. My car is postface 07 Liberty 6 speed not a tbSti

I’ll take a peek at the FSM link in my signature for the ADM specific manual.

Its on SLI.net:

9F18667D-A610-4765-B69E-E872CB6C4F4F.jpeg

Just in case your car is a tbSTi:

Its worth noting that the my08 tbSTi has a unique engine harness compared to: other postfl tbSTi and eg my08 GT.

Some part of the harness is split off the main engine bay plug, in a way thats more similar to GR STi.

I’m not sure if this consideration even affects the ecu plug, but it’s certainly imho worth mentioning.

[TRVIING]

Boomslang said the 2008-2018 Subaru STI NON-USDM harness will work. Do you guys reckon it so? Here is the PDF file for the ECU pinout I found from Ben's website

[bigBADbenny]

Not mine, these Subaru FSM’s are in the public domain.

My post is a compilation of FSM’s but also a guide to diy parts translation.

You’d want the FSM from general market/eudm/adm and confirm if the wiring diagrams and pinouts are DOTC but for single avcs, not dual avcs.

Chances are it’s the media fire my07 link above on sli net.

[bigBADbenny]

Yes so I went to look for it in the above link, more useful to cross reference the actual diagram than to take a stab at another models info:

[TRVIING]

You are legend. Thanks mate

Yes so I went to look for it in the above link, more useful to cross reference the actual diagram than to take a stab at another models info: