club.liberty.asn.au

Can anybody verify that this part is 35046AG000 please? Doesnt seem to be a part# for the knuckle shown on the opposedforces parts diagram, or its misdescribed.
thanks
jp

Hi,
This is Peter from The CorgiWerx Technical Help Desk.
We can confirm that 35046AG000 is the incorrect part for the 6MT shifter.

35046AG000 is for the Gen4 Liberty 5MT shifter and associated Impreza and Forester models.
35046AG000 does not suit 6MT.

Fitting a 35046AG000 to a 6MT will kick the gear lever into the wrong position.
CorgiWerx has rectified and installation where someone had fitted a 35046AG000 to a 6MT
This involved cutting the uni-joint and re-welding it in a new position to compensate for the worng angle.

Suggest that you get a Gear Shift Joint Bush kit form CorgiWerx to repalce the worn out bushes.

By the way, we do not believe that there is an OEM replcement part for the uni-joint assembly for the 6MT, just the repalcement bushes.
But CorgiWerx bushes are better and lower cost.

Thanks for that, just spoils another idea! As soon as I am fit enough to get underneath I will talk to you about one of your joints.
thanks
jp 08 gtb 6mt wagon