For those that have done a vf52 turbo upgrade were there any other parts aside of gaskets that you required?
E.g oil lines etc??? Anything else needed?
Australian Liberty Owners Club
Turbo upgrade
4 posts
• Page 1 of 1
Turbo upgrade
by Gtb08 » Fri Sep 02, 2016 10:56 am
2008 OBP Liberty GT SpecB ATM - KOBE MSPORTS SILCONE INTAKE & MAF HOSES - TUSPEED 3-PORT BCS - AVO DUMP 160 CEL CAT - KIDO TUNED - ATM TRANS COOLER - KOBE MSPORTS BoV - KOBE FUEL PUMP - WG PORT N POLISHED VF52 TURBO - MISHIMOTO TB HOSE - GReddy DUAL CATCH CANS - CUSTOM REDBACK MUFFLERS - RED STITCHED LEATHER WRAPPED STEERING WHEEL - DBA T2 SLOTTED ROTORS - XYZ SS COILOVERS - CUSCO STRUT BRACE - quarter 13.42@100MPH
- Gtb08
- Posts: 100
- Joined: Tue Apr 28, 2015 9:31 pm
- Location: Gold Coast
- Car: 2008 GT-B Liberty Auto
- Real name: Tony
Re: Turbo upgrade
by vinshonz » Fri Sep 02, 2016 11:14 pm
from what i've researched, pretty sure its straight swap using factory lines etc.
2008 Liberty GT Tuned by STi 27 of 250 made
PnP VF52, AVO TBE into TCP-Ti Mufflers, AVO panel filter, Mishimoto TMIC, Turbosmart Kompact BOV, Kobe Silicone Intake + SFB, Kobe 340LPH pump,
Tuspeed 3Port, Exedy HD + lightened flywheel, some Whiteline bits & Corgiwerx bits, Zeitronix Flex Fuel Analyser Kit , e85/98 Flex fuel -Got it REX tuned
2007 WRX Tuned by STi 35 of 200 made
STi Spec C TMIC+ProcessWest splitter, AVO TBE, X3E Silicone Intake, APS CAI, TurboSmart Kompact, Walbro, GrimmSpeed 3 Port, DEFI gauges
TD05-18G 198.5kw on RTRs Dyno - SOLD
PnP VF52, AVO TBE into TCP-Ti Mufflers, AVO panel filter, Mishimoto TMIC, Turbosmart Kompact BOV, Kobe Silicone Intake + SFB, Kobe 340LPH pump,
Tuspeed 3Port, Exedy HD + lightened flywheel, some Whiteline bits & Corgiwerx bits, Zeitronix Flex Fuel Analyser Kit , e85/98 Flex fuel -Got it REX tuned
2007 WRX Tuned by STi 35 of 200 made
STi Spec C TMIC+ProcessWest splitter, AVO TBE, X3E Silicone Intake, APS CAI, TurboSmart Kompact, Walbro, GrimmSpeed 3 Port, DEFI gauges
TD05-18G 198.5kw on RTRs Dyno - SOLD
- vinshonz
- Posts: 257
- Joined: Tue Mar 22, 2016 6:53 am
- Location: MELB
- Car: 2008 Liberty GT TunedBySTi
- Real name: Vincent
Re: Turbo upgrade
by Glexen » Sat Sep 03, 2016 12:11 am
Yeah its a straight swap, nothing extra needed except new gaskets as you said.
-
Glexen - Posts: 121
- Joined: Fri Dec 27, 2013 3:56 pm
- Location: Gosford NSW
- Car: Subaru 08 Liberty GT STI
Re: Turbo upgrade
by Gtb08 » Sat Sep 03, 2016 8:07 am
Glexen wrote:Yeah its a straight swap, nothing extra needed except new gaskets as you said.
Greqt thanks for thwt. Just wanted to be sure. Turbo upgrade....on it's way!
2008 OBP Liberty GT SpecB ATM - KOBE MSPORTS SILCONE INTAKE & MAF HOSES - TUSPEED 3-PORT BCS - AVO DUMP 160 CEL CAT - KIDO TUNED - ATM TRANS COOLER - KOBE MSPORTS BoV - KOBE FUEL PUMP - WG PORT N POLISHED VF52 TURBO - MISHIMOTO TB HOSE - GReddy DUAL CATCH CANS - CUSTOM REDBACK MUFFLERS - RED STITCHED LEATHER WRAPPED STEERING WHEEL - DBA T2 SLOTTED ROTORS - XYZ SS COILOVERS - CUSCO STRUT BRACE - quarter 13.42@100MPH
- Gtb08
- Posts: 100
- Joined: Tue Apr 28, 2015 9:31 pm
- Location: Gold Coast
- Car: 2008 GT-B Liberty Auto
- Real name: Tony
4 posts
• Page 1 of 1
Return to 2.5T engine specific
Who is online
Users browsing this forum: No registered users and 6 guests