Page 1 of 2
Tuner in hobart
Posted:
Thu Apr 23, 2015 10:47 amby Beno
I live in Brisbane but found a receipt from autocraft in Hobart from previous owner. Has had a ezy re flash tune from there and wondering if these guys are any good ? I get a lot of surging under wot which is annoying.. AFR IS 12.2 to 1.. Will get a tune from Matt when he is in brissy next.. What's the reason for this surging ?
Thanks
Ben
Re: Tuner in hobart
Posted:
Thu Apr 23, 2015 2:43 pmby Robbks
WHat's the date of the receipt.
Autocraft has changed owners from the original guys in 2013.
but are you using 98RON fuel?
Have you changed anything on the intake or exhaust?
Re: Tuner in hobart
Posted:
Thu Apr 23, 2015 4:54 pmby Beno
The receipt is dated 2011 and always run 98 ron. Haven't changed anything as yet I was thinking it could just be the tune. Would it make any difference if it was tuned to 95 and now I run 98 ? Going to do turbo inlet, maf and intake soon so will need a tune anyway but was asking as there are some average tuners out there ?
Re: Tuner in hobart
Posted:
Thu Apr 23, 2015 10:39 pmby KiDo_Tuning
EzyFlash or Ecu flash?
Had it on a dyno recently?
Re: Tuner in hobart
Posted:
Fri Apr 24, 2015 7:15 amby Beno
It says the ezyflash on the receipt... No I haven't waiting till you come to Brisbane so I can get it done ?
Re: Tuner in hobart
Posted:
Fri Apr 24, 2015 7:26 amby KiDo_Tuning
Beno wrote:It says the ezyflash on the receipt... No I haven't waiting till you come to Brisbane so I can get it done ?
If it says EzyFlash then it may be a LOCKED ECU unless you can find the EzyFlash unit. Pne of the Brisbane members may be able to see if they can access your ECU. I cannot bypass Chiptorques EzyFlash locks
Re: Tuner in hobart
Posted:
Fri Apr 24, 2015 7:53 amby Beno
Well that is shit what's the other option but another ecu and tune from there ?
Re: Tuner in hobart
Posted:
Fri Apr 24, 2015 7:56 amby WIDELOAD
Ezyflash can be unlocked by a dealer.
Give Chiptorque a call and ask how much for them to unlock it.
Re: Tuner in hobart
Posted:
Fri Apr 24, 2015 8:08 amby Beno
This is the receipt ...
Re: Tuner in hobart
Posted:
Fri Apr 24, 2015 8:11 amby Beno
.......
Re: Tuner in hobart
Posted:
Fri Apr 24, 2015 10:23 amby Beno
So I dont have the unit.. But got onto previous owner and he is going to look for it.. Chip torque said 220 to unlock but have to buy another flash unit through them and use their tune.. They basically said if stay with their tune they are happy to help.. Bullshit I just want it unlocked so Matt can do his thing.
Re: Tuner in hobart
Posted:
Tue May 05, 2015 10:53 pmby sinno91
I had the exact same problem with my GT. Was locked with EzyFlash, such a pain in the ass. I got on to the previous owner and he had the device and gave it me for free, I was very lucky hope all goes well for you. Matt's tune is absolutely amazing compared to the EzyFlash crap, before Matt's tune I had very noticeable stutter around 3000rpm which would go away after a ECU reset but return after a few 100km's. Good Luck!!
Re: Tuner in hobart
Posted:
Mon May 25, 2015 4:08 pmby Beno
Thanks Sinno,
Now I was lucky enough to get the ezy flash module of the previous owner for free as well.. It was on the 95 tune. Now I have flashed it to 98 high boost tune which is about 15-16 psi.. Have just got Kobe inlet and maf hoses and bigger fuel pump. Will put all these in and hopefully get a tune of Matt soon. Will fitting the pump and hoses affect the way it runs with this tune ? I gather there won't be any gains but hope it still runs alright.. Mine is like that with this tune it has slight hesitation as it comes on full boost. Is this bad ?
Thanks Ben
Re: Tuner in hobart
Posted:
Mon May 25, 2015 5:49 pmby THE SpecB
Beno wrote:Thanks Sinno,
Now I was lucky enough to get the ezy flash module of the previous owner for free as well.. It was on the 95 tune. Now I have flashed it to 98 high boost tune which is about 15-16 psi.. Have just got Kobe inlet and maf hoses and bigger fuel pump. Will put all these in and hopefully get a tune of Matt soon. Will fitting the pump and hoses affect the way it runs with this tune ? I gather there won't be any gains but hope it still runs alright.. Mine is like that with this tune it has slight hesitation as it comes on full boost. Is this bad ?
Thanks Ben
Beno get a tune asap. Rid Ezy Flash and go for a tune by Matt or another reputable tuner
Re: Tuner in hobart
Posted:
Thu Sep 24, 2015 8:31 amby sinno91
Beno wrote:Thanks Sinno,
Now I was lucky enough to get the ezy flash module of the previous owner for free as well.. It was on the 95 tune. Now I have flashed it to 98 high boost tune which is about 15-16 psi.. Have just got Kobe inlet and maf hoses and bigger fuel pump. Will put all these in and hopefully get a tune of Matt soon. Will fitting the pump and hoses affect the way it runs with this tune ? I gather there won't be any gains but hope it still runs alright.. Mine is like that with this tune it has slight hesitation as it comes on full boost. Is this bad ?
Thanks Ben
That's great news, as mentioned above get a proper tune sorted and you'll be more than happy with the results. I actually use the EzyFlash device to flash Matt's tunes to my ECU it works very well and makes it easy to switch between different tunes for economy or whatever I want really.