GONEWALKABOUT wrote:This is only based on my limited knowledge of wrx parts:
-VF52 turbo
I think the flanges may be different. WRX and Foresters usually interchange.
VF52 is a bolt-on replacement for a VF46, no changes required (aside from tune).
-TMIC
I think this may also not be interchangeable with liberties
Correct, not interchangeable (at least not without mods so significant as to make it not worthwhile).
-BOV
Good possibility check flange style.
Some WRX ones are interchangeable, not STI ones. Mazda 3 MPS BOV also works.
-3" Turbo back exhaust
I think the brackets may be different for mufflers.
Dump pipes are basically identical. Mufflers are different (mount points and flanges), I suspect the mid-pipe is too (different length, Y is different).
-Headers
probably ok, pretty generic as long as they are from the same engine (ej255)
Yes, I believe that's correct.
-short shift for a 6MT & bushings
Yes but does require small amounts of modification. Info is here on forum and has been done.
Yep, have seen this first hand - it's almost identical, but not quite. Workable with interchange of key components.
-Silicon intake
Looks similar, possible
Yep, these are interchangable with appropriate year WRXs.
-Pitch Stop Mount
Looks ok!
Can't comment on this one.
-suspension bushings in Polyurethane (or similar)
probably, Not sure if youd want to buy these second hand anyway?
Some of them are interchangeable, some are not. I agree though, go new here.