Hey guys,
Driving home from work yesterday, I was giving the car a bit of a wrap through some corners and all was fine under S#. Having a blast. About an hour later, I am having power issues. Nothing seems to be going to the wheels.
The car drives fine, runs fine, with no obvious sound of a miss fire and no miss when I actually accelerate. No fault codes are showing on torque either.
When I accelerate, the car hits about 3psi and it just can't hold. I was in a rush, so I couldn't look at it as soon as I got home.
My thoughts were immediately an air leak somewhere.VAC was showing around -22 ish, when normally it would sit around -19 or -20 right?
I'm basically going to have all of a couple of hours to try and hunt around for the leak when I get the chance and just thought i'd ask for any other opinions before I go hunting for the wrong thing. I've been around these things a while and this is the only logical thing i could come up with.
Cheers
G