Australian Liberty Owners Club

Skip to content

Xforce fitted

Posts specific to the 2.5 litre turbo engine
Post a reply

Xforce fitted

Postby Newbie GT » Thu May 22, 2014 10:26 pm

Hey guys I fitted my TBE today xforce. Fitted very well up to stock Mufflers (alignment done with new rubber mounts)
Took me 7 hours solid by my self with rope to hold up system at points while I secured etc
Results are fantastic really noticeable now for a tune..
Newbie GT
 
Posts: 1533
Joined: Mon May 28, 2012 6:44 pm
Location: Victoria
Top

Re: Xforce fitted

Postby <GB> » Fri May 23, 2014 4:24 pm

Any pictures? video of the sound?
<GB>
 
Posts: 2290
Joined: Tue Nov 22, 2011 9:05 am
Location: MELBOURNE
Car: 08 Liberty STI
Profile URL: viewtopic.php?f=18&t=14660
Top

Re: Xforce fitted

Postby Newbie GT » Fri May 23, 2014 6:35 pm

<GB> wrote:Any pictures? video of the sound?


No it's on stock mufflers but sounds deeper
Newbie GT
 
Posts: 1533
Joined: Mon May 28, 2012 6:44 pm
Location: Victoria
Top

Re: Xforce fitted

Postby gen3v8 » Fri May 23, 2014 7:07 pm

Newbie GT wrote:Hey guys I fitted my TBE today xforce. Fitted very well up to stock Mufflers (alignment done with new rubber mounts)
Took me 7 hours solid by my self with rope to hold up system at points while I secured etc
Results are fantastic really noticeable now for a tune..

So how can you get an Xforce TBE with stock mufflers.. :roll:
Just an old V8 fart that has seen the LIGHT
User avatar
gen3v8
 
Posts: 407
Joined: Fri May 07, 2010 8:49 pm
Location: South Sydney
Car: MY09GT SPECB WAGON GEN IV 6mt
Real name: Dave
Top

Re: Xforce fitted

Postby Newbie GT » Fri May 23, 2014 8:38 pm

gen3v8 wrote:
Newbie GT wrote:Hey guys I fitted my TBE today xforce. Fitted very well up to stock Mufflers (alignment done with new rubber mounts)
Took me 7 hours solid by my self with rope to hold up system at points while I secured etc
Results are fantastic really noticeable now for a tune..

So how can you get an Xforce TBE with stock mufflers.. :roll:


Fitted xforce dump and centre an Y pipe to stock mufflers
Newbie GT
 
Posts: 1533
Joined: Mon May 28, 2012 6:44 pm
Location: Victoria
Top

Re: Xforce fitted

Postby peadya100 » Fri May 23, 2014 10:11 pm

Would you be able to get a sound clip of yours newbie? Im considering going back to stock mufflers and id love to hear them with an xforce system like mine!
Diamond Works SI-DRIVE Covers - Subaru Liberty/Legacy MY07 to MY09

https://www.facebook...aruDiamondWorks
subaru.diamondworks@gmail.com
User avatar
peadya100
-stickered-
 
Posts: 2243
Joined: Wed Dec 08, 2010 1:21 pm
Location: Norah Head, Central Coast
Car: 2007 Liberty GT-B Wagon
Real name: Adam
Profile URL: viewtopic.php?f=10&t=21072
Top

Re: Xforce fitted

Postby dr20t » Fri May 23, 2014 11:57 pm

For all the shit everyone gives you, good on you for fitting it yourself

Mick
Addicted to corn juice....

My FrankenStien build thread here: viewtopic.php?t=14137
User avatar
dr20t
 
Posts: 4191
Joined: Sun Oct 23, 2011 10:43 pm
Location: South West Sydney NSW
Car: 04 Liberty GT Auto
Real name: Mick
Profile URL: viewtopic.php?t=14137
Top

Re: Xforce fitted

Postby Sean82 » Sat May 24, 2014 12:45 am

Newbie GT wrote:Hey guys I fitted my TBE today xforce. Fitted very well up to stock Mufflers (alignment done with new rubber mounts)
Took me 7 hours solid by my self with rope to hold up system at points while I secured etc
Results are fantastic really noticeable now for a tune..

Call it a stealth back man 8)

Top effort for self install too! They can be a right PITFA to do by yourself
Current: MY04 LGT 5EAT Wagon
Previous: MY11 Forester S-Edition VF52|ID1000s|Stuff|E85|12.9s @ 106
User avatar
Sean82
 
Posts: 459
Joined: Tue May 14, 2013 10:44 am
Location: Sydney
Car: MY04 GT with JDM GRB EJ207 swap
Real name: Sean
Top

Re: Xforce fitted

Postby Newbie GT » Sat May 24, 2014 2:41 pm

peadya100 wrote:Would you be able to get a sound clip of yours newbie? Im considering going back to stock mufflers and id love to hear them with an xforce system like mine!


Hi Adam will do one for you hope next week
Newbie GT
 
Posts: 1533
Joined: Mon May 28, 2012 6:44 pm
Location: Victoria
Top

Re: Xforce fitted

Postby Newbie GT » Sat May 24, 2014 2:44 pm

dr20t wrote:For all the shit everyone gives you, good on you for fitting it yourself

Mick



Thanks mick I'm over people's opinions and giving me shit but you know what I planned this and even though it took me a whole day a sense of achievement was met.

Very happy with job used oem gaskets for turbo side and hi tech gaskets for centre etc as I found them more thicker material!

Just found using some jdm muffler hanger rubbers helped align mufflers at the rear
Newbie GT
 
Posts: 1533
Joined: Mon May 28, 2012 6:44 pm
Location: Victoria
Top

Re: Xforce fitted

Postby Newbie GT » Sat May 24, 2014 2:45 pm

Sean82 wrote:
Newbie GT wrote:Hey guys I fitted my TBE today xforce. Fitted very well up to stock Mufflers (alignment done with new rubber mounts)
Took me 7 hours solid by my self with rope to hold up system at points while I secured etc
Results are fantastic really noticeable now for a tune..

Call it a stealth back man 8)

Top effort for self install too! They can be a right PITFA to do by yourself



It wasn't easy had car on gutter most of job and rope to hold up on hangers but was worth it
Newbie GT
 
Posts: 1533
Joined: Mon May 28, 2012 6:44 pm
Location: Victoria
Top

Re: Xforce fitted

Postby kiahatsiu » Sat May 24, 2014 3:20 pm

dr20t wrote:For all the shit everyone gives you, good on you for fitting it yourself

Mick

This. Newbie seems to know more than most on here. And if he doesn't, he isn't afraid to ask...heh....
Kinda flush. Fitment is something. ADM as F*ck.
User avatar
kiahatsiu
 
Posts: 1796
Joined: Tue Sep 01, 2009 6:09 pm
Location: Brisbane
Car: Silver 05 GT Wagon
Real name: Ian
Top

Re: Xforce fitted

Postby shav » Tue May 27, 2014 12:16 pm

Well Done Newbie. At least you had a go and took your time to get it done right.
Cheers
Shav

MY07 Subaru Liberty GT Premium Sedan | HKS Panel filter | Pierburg 3 port | Whiteline adj sways F&R | Cusco HD mounts | Whiteline HD front sway links | Anycarlink AL-1080B | Ultrex s/s 3" CBE | Ultrex PU lip spoiler | Invidia s/s dump pipe and 100cel cat | KiDo tuned | DBA T2 rotors | Intima SS brake pads | Mishimoto TMIC | Koya ISR7 wheels | 265L Kobe fuel pump | Diamond Works SI Drive dial | Bilsteins

COSMETIC MODS ON THE WAY

My other toys:
2012 Focus Cayo 2.0 road bike
2015 Cervelo S5 VWD road bike
User avatar
shav
 
Posts: 3609
Joined: Tue Jun 26, 2012 12:01 pm
Location: Adelaide, Southern Suburbs
Car: MY07 Subaru Liberty GT Premium
Real name: Shav
Profile URL: viewtopic.php?f=10&t=18915&start=480
Top

Re: Xforce fitted

Postby peadya100 » Tue May 27, 2014 12:24 pm

Hey newbie.. any chance of that exhaust clip?
Diamond Works SI-DRIVE Covers - Subaru Liberty/Legacy MY07 to MY09

https://www.facebook...aruDiamondWorks
subaru.diamondworks@gmail.com
User avatar
peadya100
-stickered-
 
Posts: 2243
Joined: Wed Dec 08, 2010 1:21 pm
Location: Norah Head, Central Coast
Car: 2007 Liberty GT-B Wagon
Real name: Adam
Profile URL: viewtopic.php?f=10&t=21072
Top

Re: Xforce fitted

Postby Newbie GT » Fri May 30, 2014 12:10 am

Thanks for encouragement guys.

Adam I will try get a clip I will say it sounds great when booted..

Def louder than stock due to bigger flow TBE
Newbie GT
 
Posts: 1533
Joined: Mon May 28, 2012 6:44 pm
Location: Victoria
Top
Next
Post a reply

Return to 2.5T engine specific

Who is online

Users browsing this forum: No registered users and 21 guests

Powered by phpBB® Forum Software © phpBB Group