Page 1 of 1

Big end bearing death rattle?

PostPosted: Wed Jan 29, 2014 7:39 pm
by goatsie
Hey all,

Pretty sure this is a big end bearing death rattle......

https://www.youtube.com/watch?v=7DqIjhQ8g8A

Just wondering if anyone can possibly confirm this?
Noise gets much, MUCH worse when it's revved.

Cheers!

Re: Big end bearing death rattle?

PostPosted: Wed Jan 29, 2014 9:00 pm
by alessandro132
Yep, definitely sounds like the big end to me!

Re: Big end bearing death rattle?

PostPosted: Wed Jan 29, 2014 9:07 pm
by Newbie GT
Woooo she stuffed mate unfortunately ...

Did this noise progressively get worse or just happened?

Re: Big end bearing death rattle?

PostPosted: Wed Jan 29, 2014 9:36 pm
by goatsie
Noticed a slight rattle when I was driving. Then next time I started it, this was going on.

Now I just need to know what my options are if anyone can help!

Re: Big end bearing death rattle?

PostPosted: Wed Jan 29, 2014 10:21 pm
by Newbie GT
goatsie wrote:Noticed a slight rattle when I was driving. Then next time I started it, this was going on.

Now I just need to know what my options are if anyone can help!


Slight rattle at idel or when driving normally. ?

Re: Big end bearing death rattle?

PostPosted: Wed Jan 29, 2014 10:28 pm
by seanmau5
Newbie GT wrote:Slight rattle at idel or when driving normally. ?


goatsie wrote:Noticed a slight rattle when I was driving.


Are. You. For real? :roll:

goatsie wrote:Now I just need to know what my options are if anyone can help!


STI front cut with a bigger turbo and supporting mods :D

Document your build here while you're at it please.

Re: Big end bearing death rattle?

PostPosted: Thu Jan 30, 2014 3:15 am
by KiDo_Tuning
goatsie wrote:Noticed a slight rattle when I was driving. Then next time I started it, this was going on.

Now I just need to know what my options are if anyone can help!


Rising Sun Subaru in Queensland do EJ257 short blocks + New oil pump + gasket kit for a good price. Budget around $1200 for labour

Re: Big end bearing death rattle?

PostPosted: Thu Jan 30, 2014 7:31 am
by goatsie
seanmau5 wrote:
goatsie wrote:Now I just need to know what my options are if anyone can help!


STI front cut with a bigger turbo and supporting mods :D

Document your build here while you're at it please.


Haha. This was my first thought.... does anyone know if this is even possible?

KiDo_Tuning wrote:Rising Sun Subaru in Queensland do EJ257 short blocks + New oil pump + gasket kit for a good price. Budget around $1200 for labour


Thanks mate. I'll have a look into it, I'm in Melbourne though.

Re: Big end bearing death rattle?

PostPosted: Thu Jan 30, 2014 10:01 am
by bigBADbenny
How many K's are you at?

Re: Big end bearing death rattle?

PostPosted: Thu Jan 30, 2014 10:20 am
by goatsie
bigBADbenny wrote:How many K's are you at?


148k.

I'm wondering if there is any chance it could be something else because the sound literally appeared instantly, it wasn't a slow knocking sound coming on as most have described before the big end bearing going. Though, there's every chance I may not have heard or notice this.....

There was a severe loss of power, I could barely manage to ge tto 60km/h driving it home. Is this a result of the big end bearing going?
I've been told to get a compression test before jumping to any conclusions.

Re: Big end bearing death rattle?

PostPosted: Thu Jan 30, 2014 10:28 am
by bigBADbenny
Drop the oil through a strainer to see whats in it...
Go from there. I can give you a hand if you are not too far away from Collingwood...

Re: Big end bearing death rattle?

PostPosted: Thu Jan 30, 2014 11:20 am
by goatsie
I'm in Croydon.

I'll drop the oil as soon as I can and see what's in there.