Page 1 of 1

OEM Flywheel specs

PostPosted: Tue Aug 27, 2013 5:49 pm
by TomTom
Hunting for the specs on the OEM Flywheel, assuming it wouldn't change if it's a Tbsti model? Needing the size and a few other bits of information to compare. From what I've been told and read these are dual mass flywheels and haven't changed since 2002. In relation to : viewtopic.php?f=18&t=23129&start=60#p337669

Another question, My problem is I've bought a new Exedy 6 Speed clutch Sti OEM replacement which I need to confirm will be compatible with what looks like a flywheel for a 5MT. (I'll try and dig up the part numbers on both these items as this will be very vague).

Re: OEM Flywheel specs

PostPosted: Tue Aug 27, 2013 6:24 pm
by Boostaddict
Hey Tom

If you are going to try to mate the five-speed flywheel to the six speed clutch. Then I would just ring Dakin or Subaru themselves and find out whether it fits not??

Re: OEM Flywheel specs

PostPosted: Tue Aug 27, 2013 6:38 pm
by cliffo3rb
Here's a photo of the flywheel in my 05 3RB 6MT.

I replaced the clutch with this http://www.amazon.com/EXEDY-FJK1000-OEM ... B001B57M3G

Image

Hope that is of some help.

Re: OEM Flywheel specs

PostPosted: Tue Aug 27, 2013 7:12 pm
by TomTom
Boostaddict wrote:Hey Tom

If you are going to try to mate the five-speed flywheel to the six speed clutch. Then I would just ring Dakin or Subaru themselves and find out whether it fits not??


Yup Nick is onto that, his just having a hard time as Subaru are being Subaru. Adam over at Tuspeed is actually offering to get me info as he has a few direct contacts.

Thanks Cliffo3rb that actually may come in handy.