club.liberty.asn.au

Posted: **Sat Jun 08, 2013 7:53 pm**

Easy to fit ?

Does this require a lot of time ?

I hear benefits are good ! Is there any walk throughs?

Been looking at the Kobe ones
http://www.gumtree.com.au/c-ViewAd?AdId=1010556714

Posted: **Sat Jun 08, 2013 7:57 pm**

You will definitely find the answers to your questions in other previous posts.

From all accounts I've seen though these seem to be one of the most frustrating things to install.

Posted: **Sat Jun 08, 2013 7:59 pm**

rooby wrote:You will definitely find the answers to your questions in other previous posts.

From all accounts I've seen though these seem to be one of the most frustrating things to install.

Thanks mate I was going to try do myself maybe not !

Posted: **Sat Jun 08, 2013 8:08 pm**

Newbie GT wrote:
rooby wrote:You will definitely find the answers to your questions in other previous posts.

From all accounts I've seen though these seem to be one of the most frustrating things to install.

Thanks mate I was going to try do myself maybe not !

Nah this is one of those parts you don't want to install unless you've done it before... heard so many horror stories!

Watch this video http://youtu.be/o6ji8Pe0h2A it's just a time lapse but you'll get an idea of how much work is involved.

Posted: **Sat Jun 08, 2013 8:25 pm**

piss... looks tricky.
purchased a Kobe one a few days ago. (thanks Jack)

Posted: **Sat Jun 08, 2013 9:03 pm**

Caution wrote:piss... looks tricky.
purchased a Kobe one a few days ago. (thanks Jack)

No worries....

Also that is an STI manifold, a lot less room than our plastic manifold...

Posted: **Sat Jun 08, 2013 11:29 pm**

Ok sounds like work for a pro

Jack do you need both pipes one goes to air box and the other too ?

Posted: **Sat Jun 15, 2013 8:22 pm**

Perrin or Kobe or psr ??

Posted: **Sun Jun 16, 2013 9:26 am**

Newbie GT wrote:Perrin or Kobe or psr ??

Much of a muchness really. Choose the one you can get for the best price/looks the best in your opinion/etc.

Posted: **Wed Jul 24, 2013 8:38 am**

Hey

Which part is needed for the benefit of the turbo spool etc

Is it the sfb from air box to unsure where it goes?

Then there is another part of silicone hose which is longer ?

Anyone have a picture of where how these look / sit in engine bay?

Cheers

Posted: **Wed Jul 24, 2013 9:06 am**

Here's one I prepared earlier.

It's the silicone turbo inlet which improves spool time (apparently)

Posted: **Wed Jul 24, 2013 10:56 am**

paggaz wrote:Here's one I prepared earlier.

It's the silicone turbo inlet which improves spool time (apparently)

Champion Nathan love your machine !

So the one you labeled looks good isn't nessecary?

And the other one is under the cover which goes to turbo ?

Posted: **Wed Jul 24, 2013 11:05 am**

Cheers mate. Glad you could read my writing haha

Newbie GT wrote:
Champion Nathan love your machine !

So the one you labeled looks good isn't nessecary?

Over time, apparently they original plastic ones develop cracks.
Mine was fine, but replaced it anyway for some subtle engine bling

And the other one is under the cover which goes to turbo ?

Yes, under the cover, and under the manifold....that's why it's a PITA to install.

Posted: **Thu Jul 25, 2013 8:38 pm**

Avo is a good buy too and don't forget a throttle body hose too.
I'm after the avo short fat bit (SFB) to complete the triumvirate please

club.liberty.asn.au

Best silicone inlet kit to buy ?

Best silicone inlet kit to buy ?

Re: Best silicone inlet kit to buy ?

Re: Best silicone inlet kit to buy ?

Re: Best silicone inlet kit to buy ?

Re: Best silicone inlet kit to buy ?

Re: Best silicone inlet kit to buy ?

Re: Best silicone inlet kit to buy ?

Re: Best silicone inlet kit to buy ?

Re: Best silicone inlet kit to buy ?

Re: Best silicone inlet kit to buy ?

Re: Best silicone inlet kit to buy ?

Re: Best silicone inlet kit to buy ?

Re: Best silicone inlet kit to buy ?

Re: Best silicone inlet kit to buy ?